UNIVERSAL MOTOR MOUNT AND PINION SUPPORT
FOR ALIGN TREX 600 PRO ELECTRIC SERIES HELICOPTERS
Item Number: AT600P-UMM
Installation Diagram: CLICK HERE
Price: $50.95
Material: Aluminum 6061-T6
Models: all ALIGN TREX 600E PRO series
Need Replacement Rails or Bearings? CLICK HERE
Note: the Universal Motor Mount provides the pilot the ability to run almost-all motor and gearing combinations available for the TREX 600E PRO, with the ability to adjust for 12T through 18T MOD 1.0 pinion sizes when meshed with the standard size, 115T MOD1.0 main drive gears. With a unique Universal Motor Mount hole pattern, the design can accommodate all M4 x 30mm, M4 x 25mm, and M3 x 25mm motors on the market with a solid, four-bolt hole pattern installation. Included in
the design is the adjustable Universal Pinion Support, which has an oversized, 6 x 17 x 6mm radial bearing for incredible strength, longevity, and durability for the high-power system of the 90-class electrics.
Important: for proper operation of the Universal Motor Mount assembly (alignment and strength of mounting hold), the length of the side-rail screws is critical. A maximum allowable length of 9.0mm (from the underside of the socket head cap screw to the end of the threads) is required for proper installation.
Appropriate 8.0mm length screws are provided for the installation.
Includes:
- One (1) TREX 600E PRO Series Aluminum Universal Motor Mount and Pinion Support Assembly
- One (1) TREX 600E PRO Series Aluminum Universal Motor Base Plate
- Two (2) TREX 600E PRO Series Aluminum Universal Motor Base Adjustment Rails
- One (1) TREX 600E PRO Series Aluminum Universal Pinion Support Plate
- Two (2) TREX 600E PRO Series Aluminum Universal Pinion Support Adjustment Rails
- One (1) Radial Ball Bearing 6 x 17 x 6 mm
- Four (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- Eight (8) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
39 g (design is FEA optimized for maximum strength and minimum weight)
T700 UNIVERSAL MAIN GEAR CASE
FOR ALIGN TREX 550/600 ELECTRIC SERIES HELICOPTERS
Item Number: AT550/600-UMGC
Installation Diagram: CLICK HERE
Price: $34.95
Material: Aluminum 6061-T6
Models: all ALIGN TREX 550E, 600E, 600ESP, and 600E PRO series (replaces stock Align part #H60200 and #HN6064B).
Recommended Accessories:
TREX 700 SERIES MAIN DRIVE GEAR, 115T, MOD1.0
TREX 700 SERIES MAIN DRIVE GEAR, 164T, MOD0.7
TREX 550/600/600N SERIES HP ONE-WAY DRAWN CUP CLUTCH BEARING, HF1216
Note: the T700 Universal Main Gear Case for the ALIGN TREX 600E PRO series helicopter (also compatible with the TREX 550E and 600E/ESP series with components listed below) provides the most universal solution for gearing setups throughout the helicopter series. No more self-tapping screws into plastic, the new upgrade provides a rigid, six-screw bolt pattern for the gear to the Main Gear Case for unreal strength and simplified installation. This upgrade is a MUST HAVE for
high-power, high-voltage setups to prevent stripping of the main gear during flight and hard 3D maneuvers.
The T700 Main Gear Case can be used in conjunction with the new KDE Direct TREX 700 Series Main Drive Gear, 115T, MOD1.0 or the KDE Direct TREX 700 Series Main Drive Gear, 164T, MOD0.7 (need to purchase separately) for significantly increased strength advantages, reduced noise/wear, and alternate gearing ratios. In addition, the new High-Performance One-Way Drawn Cup Clutch Bearing (HF1216) is also available for a strong, bind-free transmission of the power to the main shaft if replacements are required.
Important Notice: the AT550/600-UMGC design is compatible with the following ALIGN components:
MOD 0.8 Tail Gearing
- Bearing Shaft: H60139A, TREX600 One-Way Bearing Shaft
- Autorotation Gear: H60198, TREX600P M0.8 Autorotation Tail Drive Gear
- Torque Tube Gear: H60228, TREX600P M0.8 Torque Tube Front Drive Gear Set
MOD 0.7 Tail Gearing
- Bearing Shaft: H60139A, TREX600 One-Way Bearing Shaft
- Autorotation Gear: H60020A, TREX600 M0.7 Autorotation Tail Drive Gear
- Torque Tube Gear: H60121, TREX600 M0.7 Torque Tube Front Drive Gear Set
- Belt Drive Gear: H60078, TREX600 M0.7 Metal Tail Drive Gear Assembly
Includes:
- One (1) TREX 550/600 Series Aluminum T700 Universal Main Gear Case
- Six (6) M3 x 0.5 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) High-Performance One-Way Drawn Cup Clutch Bearing, HF1216 (When Included)
- One (1) Radial Ball Bearing 12 x 18 x 4 mm
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
18 g (design is FEA optimized for maximum strength and minimum weight)
REAR FRAME MOUNTING BLOCK
FOR ALIGN TREX 600 PRO ELECTRIC SERIES HELICOPTERS
Item Number: AT600P-RFMB
Price: $19.95
Material: Aluminum 6061-T6
Models: all ALIGN TREX 600E PRO series (replaces stock Align part #H60214)
Note: the Rear Frame Mounting Block design provides superior tail control and authority, with an Aluminum 6061-T6 crossbar construction that prevents flex during high-torque maneuvers of both the helicopter rear frame section and the connected tail boom braces. The upgrade incorporates the landing skid mounts and crossbar into one high-strength design; offering significantly improved stiffness and strength of this critical area for tail support and resultant control.
Includes:
- One (1) TREX 600E PRO Series Aluminum Rear Frame Mounting Block
- Two (2) M3 x 0.5 x 14 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
Finish:
Clear anodize, mirror-polish CNC gloss
Weight:
9 g (design is FEA optimized for maximum strength and minimum weight)
And for those looking for motors designed to push the limits of performance, efficiency, and durability to new heights never before seen in RC flight, the new KDE Direct XF Brushless Motor Series is almost here! Check out the Pre-Launch video showcasing the unreal capability of these motors on YouTube.
Click HERE to check out the vid.
Source: KDE Direct
Be The First To Comment
Related Post
Please Leave Your Comments Below