Beast X Be Absolute Stable @ Zone
Zone would like to welcome Beast X Flybarless systems as the latest addition to the Weston Park Zone event sponsor list.
● MICROBEAST has an aluminum composite desig n casing. Its slight dimensions allow it to be installed in practically any model helicopter. MICROBEAST can be installed horizontally as well as vertically.
● The sensory system is based on the newest MEMS technology. Software with sophisticated sensor data processing makes installation in electrical & nitro model helicopters possible.
● With an optional adapter cable, MICROBEAST can also be utilized solely as a tail gyro. This is recommended especially for whoever is switching from the conventional paddle system and wants to slowly approach the RIGID operation with the 3 axle solution (3G-Gyro Mode).
● The well-thought-out and easy setup goes smoothly with no need of an expensive programming box or computer. This makes it easy to still change a number of settings even at the airfield.
● Moreover MICROBEAST’s integrated swashplate mixer enables the use of simple remote control systems which do not have their own swashplate mixing (NO-MIX).
● MICROBEAST is able to process many types of sum signals (PPM / S-BUS / Spektrum). With the optional Spektrum Satellite Adapter, installation in indoor model helicopters is also possible without a great number of wires.
● Updates and advanced setup possibilities (Setups) can be done comfortably with the optional USB interface „USB2SYS“ via the BEASTLINK interface. Software for Windows & Mac can be downloaded free at www. BEASTX.com.
SPECS:
Operating voltage: 3,5V…8,5 V DC (Lipo 2s possible)
Processor: 32Bit ARM
Analog processing: 17Bit
Sensor technology: 3 MEMS angular rate sensors
Adjustable servo center pulse width:
Tail: 760μs / 960μs / 1520μs
Adjustable servo pulse rate:
Tail: 50 Hz / 165 Hz / 270 Hz / 330 Hz
Swashplate: 50 Hz / 65 Hz / 120 Hz / 200 Hz
Build-in swashplate mixer:
Mechanical / 90° / 120° / 140°
Serial pulse input:
PPM / S-BUS / Spektrum-satellite
Size: 34 x 25 x 13,5 mm
Weight without cable: approx. 20 g
OPTIONAL ACCESSORIES:
USB-Interface (settings / update)
Spektrum-satellite adapter*
Tail-Gyro connection cable
Zone Fun Fly 17th June 2011
Zone will be holding a fun fly on the 17th June (Friday) before the Zone competition commences on the 18th & and 19th June (Sat/Sun). This will just be a relaxed atmosphere before the excitment of the first ever Zone competition using the brand new innovative Zone Format.
- All pilots are welcome.
- BMFA insurance will be required to fly.
- £5 per pilot.
- Flying will commence from 1pm Friday 17th June and continue until the evening.
There will be opportunities for pilots to fly out of competition hours on the Saturday but obviously this is dependant on the weather due to us running a tight schedule at Zone 2011. Let’s hope for a sunny one!
Trade Stands @ Zone Weston Park
A note to all Zone 2011 sponsors and potential sponsors of the Weston Park event on the 18th & 19th June 2011. Trade stands are available to book and you can contact Craig Simmons Co-Organiser of Zone 2011 for more information at craigsimm0@virginmedia.com
Travel Support For International Visitors
A short note for international Pilot’s and Visitor’s for the Zone event taking place at Weston Park on the 18th & 19th June 2011.
Birmingham International Airport is only 27 miles away from the home of Zone, Weston Park. This is only around a 30 minute drive away.
Source: Zone News
1 Comment Already
Pingback & Trackback
Related Post
Please Leave Your Comments Below