Here is a great build series from our very good friend Chris Sexton of Team Synergy. Chris is building the new Synergy E5 and takes us through with these first vids from unboxing, detailing the features of the E5, through to the main frame. Continue through to view the vids uploaded thus far and check back with us here at RCHR as Chris continues his build. Great job Chris.

If you enjoy our post, feel free to subscribes to our rss feeds

Check this helpful vid from our good friend Adam from RC Logger. He takes us on a walk through for the RC EYE Tweaker software for the RC EYE 650 and the upcoming RC EYE 450. He explains setting up the quad to accept data, what parameters are helpful for most pilots, and configuring the quad for flight among other things. Thank you Adam for this helpful vid. View the helpful vid by continuing through.

If you enjoy our post, feel free to subscribes to our rss feeds

Our good friend Mike Fortin posted on his pilot website a cool how-to vid about making and using a heli fuel bladder. Read the statement from Mike and view the how-to vid from Mike by clicking through. Thanks Mike for sharing your experience.

If you enjoy our post, feel free to subscribes to our rss feeds

Read of my experience in building a 50-sized Bell 222 Scale helicopter, with tons of pics and a video at the end!

If you enjoy our post, feel free to subscribes to our rss feeds

Well, its the video you have all been waiting for, our setup video of the Align FL-760 3G 3-Axis Gyro on a T-Rex 700. I know that I am not the best of doing these instructional videos, especially on camera, but I think I am getting better. We are interviewing for a new instructor so don’t worry…in the future it only gets better. This video basically goes over the full setup of the system. This video is very long…about 25 minutes but it goes into alot of detail and ends with a demo flight. The download is about 920 megs as well. Enjoy…this was 4 days in the making.

If you enjoy our post, feel free to subscribes to our rss feeds

One of the first things you learn in this hobby is how addicting it is. Heli addicts are some of the most loyal addicts on the planet. When winter comes around, you find that a heli junkie rarely lets the cold stop him from getting a flying fix. If you find yourself faced with flying [...]

If you enjoy our post, feel free to subscribes to our rss feeds

This is the book I wish they would hand out to all people who start in the RC heli hobby.  95% of the questions you see asked on internet forums are answered right here in this book!  Click inside to see some pages and descriptions from the book.

If you enjoy our post, feel free to subscribes to our rss feeds

Dear Folks, The Align has already released the much-awaited Trex-700 Nitro and if you possess one or are planning to get one for yourself and also if you looking forward to boost the performance of this beast even further, Please read on and I will update you about the hottest upgrades available for this cool [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Stumbled upon this on a Runryder members gallery, though it was worth posting. Has some good general information, and information on 3 needle carbs, glow plugs, and head shimming.

Here is the guide.

If you enjoy our post, feel free to subscribes to our rss feeds

Let me get this off my chest right up front. I’m not a fan of the Dean’s Ultra connector. Yes, they’re the hobby standard, they’re inexpensive, and they work well, but they’re hard to get apart and they are a pain to solder correctly. Thus, I have changed all of my LiPo connectors over to [...]

If you enjoy our post, feel free to subscribes to our rss feeds

The Align T-Rex 700 uses a pair of clutch bell mounted magnets for the governor sensor instead of the usual fan mounted magnets.  It will be fine if you are running the Align governor included in the box, but if are like me, you opted for another governor, you will need a bit of work to fit [...]

If you enjoy our post, feel free to subscribes to our rss feeds