Align is dipping their feet into the F3C arena with a tweaked version of the 700E…

Full details have not yet been released. Keep an eye on Align’s site for more info!

Source: Align on Facebook

If you enjoy our post, feel free to subscribes to our rss feeds

Another great set of blades offered for  .90 sized helis!

690 3G Carbon Fiber Blades HN7110

These 690mm blades are specifically designed for use in a flybarless helicopter with the CG shifted outwards and a slight increase in weight.  This will enable greater stability out of your flybarless helicopter
Specifications:

Symmetrical
Length: 690×60×8.2mm
Width: 14mm
Shaft Diameter: 5mm
Weight: 380g/set

Source: Align

If you enjoy our post, feel free to subscribes to our rss feeds

Check out this Wren MW44 equipped Align Trex 700!

If you enjoy our post, feel free to subscribes to our rss feeds

PowerEdgeRC brings a powerful lipo to the table! We test it…

The testing was performed using a Century Swift NX (see model review here!), by hovering, forward flight and pitch pumping at preset intervals of 20-seconds over the course of a 4-minute flight.
This first graph shows the entire flight with Voltage, Current and RPM data displayed:

The [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Spied on a table somewhere in Align territory, a new power plant for the 700e!

What we do know is you can see the model number, RCM-BL700MX and the kv rating of 530kv. The new motor should provide greater tuning flexibility and power depending on your application. Also pictured is the redesigned mod-1 main gear.
Source: RCMania

If you enjoy our post, feel free to subscribes to our rss feeds

Check out this sick video of the testing of a new CNC main gear!

If you enjoy our post, feel free to subscribes to our rss feeds

With almost a decade of experience in the R/C hobby market, Align has released its first 90 sized electric heli. With a model in just about every other heli category in the industry, this product release has been met with great anticipation.   And without disappointment, Align has delivered again…

Having built all of the [...]

If you enjoy our post, feel free to subscribes to our rss feeds

The greatly anticipated release of the Align 3G software is just around the corner!

The much anticipated Align 3G software is almost here!
Some of the key features include:

Available in over 8 languages
3G link cable allows for graphical user interface (GUI)
Latest firmware to improve system stability and allow for pirouette compensation
Fine tune parameters through PC GUI including options relating [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Custom Heli Parts, Inc. releases a complete Align Trex 700 Nitro to Electric conversion kit…

Features:

2mm Carbon Fiber Side frames
Socket head cap screws with no shoulder
Top mounted motor
High battery mount for improved Center of Gravity
Correct servo geometry
Rear elevator servo mount
Elevator servo shaft support pin
Simple gear mesh adjustment

A M2 drill bit and M2.5 tap are required to complete [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Shape Helicopters has just released a video of their Shape 9.0 model…

If you enjoy our post, feel free to subscribes to our rss feeds

RC Mania has got a hold of a fantastic canopy off pic of a prototype Align Trex 550 and more Trex 700E shots, details inside!!

The picture above appears to be a detailed Trex 550 model. The frames and setup look like slightly enlarged Trex 500. The battery in this pic appears to be 6S, presumed [...]

If you enjoy our post, feel free to subscribes to our rss feeds

We check out KDE Direct’s new Align T-Rex 500 Tail Performance V2 Upgrade kit!

KDE Direct Align T-Rex 500 Performance Tail Upgrade V2 Review

KDE Direct produces high quality, machined aluminum upgrade parts for Align’s series of model helicopters. In this review we’ll be checking out their T-Rex 500 Performance Tail Upgrade V2 kit. The purpose of [...]

If you enjoy our post, feel free to subscribes to our rss feeds

A new electric from a very well known competitor, JR!

Since electric models have become quite prolific, it was only a matter of time before it reached the highest level of competitors in the sport. Once it became popular and quite obvious that quite a few 2009 F3C Nationals competitors were running electric models the sprint [...]

If you enjoy our post, feel free to subscribes to our rss feeds

G-Force Technologies has been the leader in bringing out high quality and high performance products for the heli market.  Here at RC Heli Resource we have reviewed a number of great offerings from G-Force so when we got the opportunity to review the new adjustable clutch block and motor mounts for the T-Rex 700N we [...]

If you enjoy our post, feel free to subscribes to our rss feeds

G-Force has a new swash tool out th120, at takes versatility to the next level, literally!

The G-Force SwashPro V2 now full range for 450 helis to 90 sized helis
 
The new G-Force SwashPro V2 (patent pending) 50/90 SwashPro (part# GFA7100) has been re-engineered to become the ultimate swashplate alignment tool for the workbench.  The new G-Force [...]

If you enjoy our post, feel free to subscribes to our rss feeds