Spied at IRCHA, a new, sleek Futaba T8FGH (heli) and A (airplane) 2.4 transmitter system!

<br />

It appears Futaba is throwing its hat in the ring for an even lower cost, but fully featured 2.4GHz 8-Channel radio system!

(Translated from German)

T8FG-R6008HS 2.4 GHz M2 Futaba seal F7035 1-F7035

Compact, handy and stylish designed 8 channel computer system with more in an integrated way

Technology FASST 2.4 GHz.

Completely developed 8-Kanal-Computer-Anlage of the elevated

Performance class with more in an integrated way 2.4 GHz FASST technology.

That FASST system is a Spread Spectrum system with frequency hopping (FHSS). It may radiate from there a maximum output of 100 mW EIRP and possesses thus sufficient reserves, also for large flight models and jets.

• no right channel interference, almost unstörbar, insensitively to electrical smog.

• central point is highly soluble 128 x 64 DOT diagram display with background lighting which provides for good legibility.

• the elegant and clear Design of the plant is made possible by the new Cap Touch system.

Contactless sensors which a 3D-Hotkey copy, permit a smooth and a closed Surface without out-standing control elements.

• simplest programming in connection with the graphically led user surface, those Menu structure and operation were taken over to a large extent by the FX30/FX-40 plants.

• the software is implemented in 8 languages: German, English, French, Italian, Spanish, Czech, Russian or Dutch.

• special precision cross control sticks with digital trim and trim value memory. Special one Worth on the tax feeling when driving through the central position one put. Experience It the new tax feeling.

• the laterally attached rotation transducers make a practical operation possible of auxiliary functions without releasing the control sticks.

• the plant has altogether 10 channels (8 prop. and 2 signal paths), whereby the channel sequence is freely selectable.

• the transmitter is already fully equipped and necessarily with 4 analog rotation transducers and 8 switches no further accessories. For almost all functions the switches or tax giver are free selectable.

• an extensive software offers also for airplane, glider and helicopter Models all necessary functions.

• sufficient free program mixers, alternatively with 5-Point curve to solve also complex Mixture functions.

• integrated trainer system with single function change-over. Freely configurable Pupil/teacher channel scheduling.

• About the SD-map knows the software of the facility at any time of the user even on the newest Conditions to be brought.

• 20 model memory internally, infinitely expandable by SD-map – 3862 models per 2 GB.

 

Functions general

• 8 proportional channels plus 2 signal paths

• 4 control stick functions, 8 switches, 4 rotation transducers

• 2 hour meters, of it one model-memory-referred

• 2 free adjustable stop watches, with MEMORY function

• switchable large announcement of the stop watches

• function key lock

• model choice, 20 internal model memory, expandable over up to 3862 models by more optional SD-map (2 GB)

• model memory direct election from the starting display

• trim value announcement in steps or %, with zero-setting by trim memory.
Functions system

• teacher pupil enterprise with single function change-over and mix enterprise

• coach function also for virtual channels, 8 and/or 12 channel enterprise

• free configurable pupil teachers channel scheduling

• hardware pole reversal for all givers and switches

• stick mode attitude 1-4

• user name with 10 indications

• language selection German, English, French, Italian, Spanish, Czech or Dutch.

 

Functions basics

• graphic servo monitor with neutral and servo test

• model choice and copying function, model name with 10 indications

• choice of type of model, engine model, Segler, heli coil

• frequency shift keying general/France and modulation change-over 7/12 channel.

• free adjustable expenditure sequence for the channels 1-8

• free selectable tax givers – and trimmer selection for all functions

• free selectable tax givers and trimmer selection also for virtual channels.

• for all tax givers (also switch etc.) freely selectable trimmer selection

• digital control stick trim, alternatively with normal or ATL (more asymmetrical) trim function.

Alternatively in the group mode (effective in all flight conditions) or in the single mode, (effectively only in the respective flight condition).

• free giver allocation for the signal paths 9 + 10.

• servo in the middle adjustment for channels 1-8

• servo pole reversal for channels 1-10

• Fail safe einstellung, channel 3 (gas) in the 7-Kanal-Modus, for all channels in the multi-mode.

• servo way attitude with limit function (ATV) for the 8 prop. channels

• terminator point attitude with Limiterfunktion for channels 1-8

• engine out function

• no-load operation 2

• trim step attitude

 

Functions Airplane

Extensive mixer menus for models with up to 4 Flächenservos.

Apart from the choice of the type of surface can also between the tail unit variants, normally, separate elevator with transverse function (Ailvator) as well as V-tail unit to be selected. Also delta models or motorized only wing models of 2… 4 Flächenservos stand to the selection. These mixture menus already are after call, that Accordingly, pre-programmed and all necessary mixture functions contain model.

• 5 and adjustable dual rate/Expo attitudes freely which can be assigned.

• 5 free program mixers linear or 5 point curve per model memory, alternatively with/without trim and offset mixing.

• 5-Point throttle curve

• speed attitude for throttle servo

• aileron differentiation

• mixer spoiler (Flaperon)

• mixer height spoiler (Flaperon)

• mixers side crosswise

• mixer side height

• mixer Snap roll

• mixture adjustment

• gyroscope attitude

• mixers engine, to the 2-step scolded from engines, with individual speed attitude for stage 1/2 as well as back and forth.

 

Functions Glider

Also for sail flight models extensive mixer menus stand for Models with up to 6 servos for the order. Alternatively also or without motorizing. Apart from the choice of the type of surface can also between the tail unit variants, normal, separate elevator with transverse function (Ailvator) as well as V-tail unit to be selected. Also only wing models of 2… 6 Flächenservos stand to Selection. These mixture menus are pre-programmed already and contain all necessities Mixture functions.

• 5 flight conditions per model memory, with priority assignment and adjustable switching delay. With log IC switching function.

• 5 free program mixers linear or 5 point curve per model memory, alternatively with/without trim and offset mixing.

• aileron differentiation

• way attitude curving flaps

• mixers transversecurve

• mixer transverse side

• mixers spoiler-curve

• mixer height spoiler

• mixer curving height

• mixers side crosswise

• mixer Butterfly with offset and delay attitude

• mixer Butterfly – height

• mixers trim-mix for crosswise, side and height, with speed attitude and FZS Umschaltverzögerung.

• gyroscope attitude

• mixers engine, to the 2-step scolded from engines, with individual speed attitude

for stage 1/2 as well as back and forth.

 

Functions helicopters

The mixture menus for helicopters essentially differ by the swash plate control.

All swash controls such as H1, HE3 (90°), HR3 (120°), H-3 (140°), H4 and H4-X (45°) are integrated. A special feature is the adjustable linkage compensation for the H3 and H4 types. This prevents the interaction or otherwise unusual shifts with larger or asymmetrical deflections, whereby Servos in the long term Damage to take know. Also the pitch function in the speed can be adapted in order to avoid the run time difference when the HR/N3 120° linking.

• swash plate mixers

• mixer swash plate ring

• 5-Point-Pitch curve normal, fuel preselection 1.2.3, autorotation. With log IC switching function.

• 5-Point-Throttle curve normal, fuel preselection 1.2.3, autorotation. With log IC switching function.

• autorotation

• swash plate mixer (virtual turn)

• mixer swash plate – fuel (linear/centers)

• mixer tail – fuel (linear/centers)

• 5-Point-Mixer pitch tail, normal, fuel preselection 1.2.3, autorotation. With log IC switching function.

• mixture adjustment

• gyroscope mixers with 3 rates and fine trim attitude

• governors with 3 rates and fine trim attitude

 

What’s in the box?

1 transmitter T8FG 2.4 GHz FASST

1 receiver R6008HS 2.4 GHz FASST

1 Transmitter battery 7.2 V NiMH 1700 mAh

1 plug socket charger Tx-Rx 170/150 mA

1 switch cable

1 screwdriver

Compatible with the receivers R6004FF, R606FS, R6106HF/C, R607FS, R617FS, R608FS, R6008HS, R6014FS and R6014HS.

 

Specifications:

Dimensions: 175 x 175 x 55 mm
Weight: 820 g
Frequency band: 2400.00
Channel spacing: 2048 kHz
Current drain: ca. 220 mA
Power Supply: 7,2 Volt NiMH-Akku
Functions: 20/10 Servos

Watch Tower Hobbies for it’s release date estimated Late September!
 

Subscribe to the post comments feeds or Leave a trackback