PS10 10 Amp Voltage Regulator
Use your 4.8V servos in a high-voltage system
Allows the use of a 4.8V servo with a high-voltage (HV) 2.4GHz radio system.
● Steps servo power down to 5.2V.
● For use with 2.4GHz systems only.
INCLUDES: Futaba PS10 Step Down Regulator with Connectors and Instruction Sheet
REQUIRES: Installing between battery and HV compatible receiver or gyro (see COMMENTS)
Main Application: Power supply for 4.8V rated receiver and servos
Input Voltage Range: 6.0 – 12.6V
Output Voltage: 5.2V
Rated Output Current: 7.0A (momentary maximum 13.0A)
Operating Temperature Range: -10 to +45°C
Storage Temperature Range: -20 to +60°C
Dimensions: 1.4 x 0.81 x 0.39″ (35.6 x 20.5 x 10mm)
Weight: 0.52oz (14.9g)
Do not connect between receiver and servo. The receiver may operate erroneously due to insufficient capacity and fail to control the model.
If using a power switch, always connect switch between battery and PS-10
Cannot be used with a Y-harness to supply power to multiple servos.
SINGLE AXIS GYRO CONTROL TAKES A QUANTUM LEAP FORWARD
Not only are the GY430 Series single axis gyros easy to use and set-up, they also have the features modelers want. Compact and lightweight, each has a 3-pin male connector and a trimmer that limits servo travel or gain adjustment. Dip switches select gyro direction and mode – and information is displayed clearly with green and red LEDs. Plus, they’re all S.Bus and S.Bus2 capable!
Each gyro carries the same specifications
Size: 20.5 x 20.5 x 11 mm
Weight: 3.5 g
GY430 Heading Hold Helicopter Gyro
For R/C helicopter rudder control and ideal for use in R/C boats as well
GYA430 Aircraft Single Servo Gyro (FUTM0782)
GYA431 Aircraft Dual Servo Gyro (FUTM0784)
GYC430 Car Drift Gyro (FUTM0786)
- INFO: Futaba adds info to their site for the GY430 Series Heading Hold Gyro
- PRODUCT INFO: Futaba HV S.Bus Servos added
- Info Released For New Futaba Products
- NEW: Futaba Releases Product Info For Radio System
- PRODUCT INFO: Introducing the new Hercules Super BEC G2