Note: Please check with your local hobby shop or favorite online retailer for availability and pricing. For those hobby shops or online retailers in the United States who would like to carry these or any other Align products please contact either of the following Align Distributors to place your order.

Assurance RC Distributor

Heli Wholesaler

T-REX 450PRO DFC Super Combo KX015087
[KX015087]
$599.99

Instruction (3GX Programmable Flybarless System):

●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
●3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba’s S-BUS system.
●Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
●Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
●Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
●With 3GX’s built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
●Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
●3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
●Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
●3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
●With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
●3GX’s rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
●Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

Instructions:(T-REX 450PRO DFC)

Features:

● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
● New removable main shaft block and servo mounting block to simplify main shaft and servo maintenance.
● Integrated battery and ESC mounting platform, with adjusted battery position to achieve the most optimal CG position of the helicopter.
● Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
● New improved frame side plates with dedicated 3GX mounting location, to simplify wire management and overall aesthetics.
● New style gyro mounting platform with added length.
● Highly rigid and lightweight carbon side plates.
● New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.
● Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
● Equipped with Align’s brand new MX series high efficiency brushless motor.
● Highly efficient torque tube tail drive design, dramatically reduce power loss found on belt driven system.
● Streamlined design canopy.

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Specification (3GX Programmable Flybarless System):

●Operating Temperature:-10~60 degree
●X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Size:36.5×25.2×15.6 mm Size
●Weight11g Weight
●Supports Wide/Narrow Bandwidth Digital and brushless servos
●Spektrum and JR Satellite antennas support (Replaces original factory receiver)
●Futaba S.BUS system support
●Built in governor function
●Maximum working voltage:8.5V
●Compatible with 1024/2048 resolution Spektrum receivers
●Supports 90/120/135/140 CCPM swashplates
●Field setup without the use of a PC
●Compatible with 2 to 5 blades rotor heads
●Support up to 6 servos
●Automatic servo type recognization

Specification:(T-REX 450PRO DFC)

●Length: 640mm
●Height: 204mm
●Main Rotor Diameter: 710mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 12T
●Main Drive Gear: 121T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10.08:4.24
●Weight(w/o power system): 513g
●Flying Weight: Approx. 638g

Accessories:

●T-REX 450 PRO DFC Kit X 1 set
●3GX Flybarless System X 1 set
●325D 3G Carbon blades X 1set
●RCE-BL35P 35A Brushless ESC X 1
●450MX Brushless motor(3400KV) X 1
●DS415M (Metal Gear)Digital servo X 3
●DS520 Digital servo X 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gaugeX1
4.11.1V 3S Li-Po 2000~2300mAh batteryX1

Line Break - Medium Green

T-REX 450PRO DFC Combo KX015090
[KX015090]
$487.99

Note: This Combo does not included the 3GX Flybarless System, specs and details are the same as the above Super Combo.

Line Break - Medium Green

250DFC Spare Parts Pack H25135
[H25135]
$5.99

Instruction:
●Use for T-REX 250PRO DFC.

Specification:
●Spacer × 2(Φ2.5xΦ4.5×0.2mm)
●Washer × 2(Φ2×Φ5.7×0.5mm)
●Washer × 2(Φ1.5xΦ5×0.3mm)
●Socket button head self tapping screw × 2(T1.5x4mm)
●Socket button head self tapping screw × 2(T1.5x3mm)
●Socket button head self tapping screw × 2(T1.5x6mm)
●Spacer × 2(Φ3xΦ4.8×0.5mm)
●Washer × 2(Φ1.5xΦ3×0.5mm)
●M2 Set screw × 2(Φ2.5×2.4mm(M2))
●Ball link × 6(Φ3.5×8.25mm)
●Socket button head screw × 6(0#x4mm)
●Landing Skid Nut × 4(Φ2.5xΦ5.5x6mm)
●M2 Set screw × 4(M2x2mm)

Line Break - Medium Green

700DFC Swashplate Linkage Rod Set H70116
[H70116]
$9.99

Instruction:
●Use for T-REX 700E DFC.

Specification:
●450DFC Linkage rod B × 3(M3x44mm)
●Elevator ball link × 6
●Linkage rod holder × 6(Φ6xΦ4.85x3mm)

Line Break - Medium Green

700DFC Carbon Main Frame(R) / 2.0mm H70115
[H70115]
$75.99

Instruction:
●Use for T-REX 700E DFC.

Specification:
●700E DFC Carbon Main Frame(R )-2.0mm × 1

Line Break - Medium Green

700DFC Carbon Main Frame(L) / 2.0mm H70114
[H70114]
$75.99

Instruction:
●Use for T-REX 700E DFC.

Specification:
●700E DFC Carbon Main Frame(L)-2.0mm × 1

Line Break - Medium Green

700DFC Anti Rotation Bracket H70112
[H70112]
$15.99

Instruction:
●Use for T-REX 700E DFC.

Specification:
●700E DFC Matal Anti rotation bracket × 1(67.3x47x2.5mm)
●Socket button head screw × 2(M2.5x14mm)
●Φ5 Long linkage ball(M3x4) × 1(Φ5x29mm)

Line Break - Medium Green

Tail Pitch Control Link H25066A
[H25066A]
$3.99

Instruction:
●Use for T-REX 250.

Specification:
●250 Newly Control link x 2
●Collar A x 2(Φ1.5xΦ2.3×2.4mm)
●Collar B x 2(Φ1.5xΦ2.3×1.4mm)

Line Break - Medium Green

Tail Pitch Assembly H25021A
[H25021A]
$9.99

Instruction:
●Use for T-REX 250.

Specification:
●Hexagonal screw hole 1.3mm
●250 Newly Control link x 2
●T type arm x 1
●Collar A x 2(Φ1.5xΦ2.3×2.4mm)
●Collar B x 2(Φ1.5xΦ2.3×1.4mm)
●Socket button head screw x 2(0#x4mm)
●Socket button head screw x 2(0#x5mm)
●Bearing MR63ZZ x 2(Φ3xΦ6×2.5mm)
●Slide shaft x 1(Φ2xΦ3×8.4mm)
●Bearing mount x 1(Φ5xΦ6xΦ7.5×5.6mm)
●Washer x 1(Φ3xΦ4.8×0.6mm)

Line Break - Medium Green

250 Metal Tail Pitch Assembly H25134
[H25134]
$31.99

Instruction:
●Utilizes dual point attachment design for zero play and higher precision control feel.
●Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more precise and smooth.
●6061-T6 Aluminum alloy material and CNC processed.
●Use for H25129 Metal Tail Torque Tube Unit.
●Must with:
H25021A Tail Pitch Assembly.
H25066A Tail Pitch Control Link.

Specification:
●Linkage ball A(0#x2) × 1(Φ3.5×5.3mm)
●I-shaped Arm × 1
●Mount Link × 1
●Bearing F681XZZ × 2(Φ1.5xΦ4xΦ5x2mm)
●Collar × 1(Φ1.5xΦ2.5x5mm)
●Socket button head screw × 1(0#x8mm)
●Washer × 1(Φ1.5xΦ3×0.5mm)
●Tail pitch control link × 2(4.9×1.4×2.4mm)
●Collar A × 2(Φ1.5xΦ2.3×2.4mm)
●Collar B × 2(Φ1.5xΦ2.3×1.4mm)
●Socket button head screw × 2(0#x4mm)
●Bearing holder × 1(8.5×7.3×5.6mm)
●M2 Set screw × 2(Φ2.5×2.4mm)
●Washer × 1(Φ3xΦ4.8×0.6mm)
●Bearing MR63ZZ × 2(Φ3xΦ6×2.5mm)

Line Break - Medium Green

600 Tail Belt Unit H60253
[H60253]
$72.99

Instruction:
●Brand new tail gear box with higher material quality and easy maintenance.
●Utilizes dual point attachment design for zero play and higher precision control feel.
●Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more precise and smooth.
●6061-T6 Aluminum alloy material and CNC processed.
●Suitable for 600 Belt class machines.

Specification:
●Metal plate(L) × 1
●Metal plate(R) × 1
●Tail unit set × 1
●Metal Tail Rotor Shaft Assembly × 1
●Bearing MR105ZZ × 2(Φ5xΦ10x4mm)
●Socket button head screw × 4(M3x6mm)
●Socket screw × 1(M3x20mm)
●Vertical stabolizer mount × 1
●Socket collar screw × 2(M3x22mm)
●M3 Specialty washer × 2(Φ3xΦ8x2mm)
●I-shaped Arm × 1
●Mount Link × 1
●Bearing holder × 1(13.5×12.5×9.5mm )
●Linkage ball A(M2x3.5) × 1(Φ4.75×8.18mm)
●Tail control arm × 1
●Bearing holder × 1(Φ7x Φ8.3×3.5mm)
●Bearing F682XZZ × 6(Φ2.5xΦ7.1xΦ2.6mm)
●Bearing MR117ZZ × 2(Φ7xΦ11xΦ3mm)
●Socket button head screw × 1(M3x5mm)
●Socket button head screw × 6(M2.5x5mm)
●Slider Shaft × 1(Φ8x7x17.6)

Line Break - Medium Green

600 Tail Torque Tube Unit H60252
[H60252]
$82.99

Instruction:
●Brand new tail gear box with higher material quality and easy maintenance.
●Utilizes dual point attachment design for zero play and higher precision control feel.
●Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more precise and smooth.
●6061-T6 Aluminum alloy material and CNC processed.
●Suitable for T-REX 550/600.

Specification:
●Metal plate(L) × 1
●Metal plate(R) × 1
●Tail unit set × 1
●Tail rotor shaft assembly set × 1
●Bearing MR105ZZ × 2(Φ5xΦ10x4mm)
●Bearing 6701ZZ × 2(Φ12xΦ18x4mm)
●Socket screw × 4(M3x6mm)
●Socket screw × 1(M3x20mm)
●Vertical stabolizer mount × 1
●Socket collar screw × 2(M3x22mm)
●M3 Specialty washer × 2(Φ3xΦ8x2mm)
●Collar × 1(Φ12.4xΦ18x10mm)
●I-shaped Arm × 1
●Mount Link × 1
●Bearing holder × 1(13.5×12.5×9.5mm )
●Linkage ball A(M2x3.5) × 1(Φ4.75×8.18mm)
●Tail control arm × 1
●Bearing holder × 1(Φ7x Φ8.3×3.5mm)
●Bearing F682XZZ × 6(Φ2.5xΦ7.1xΦ2.6mm)
●Bearing MR117ZZ × 2(Φ7xΦ11xΦ3mm)
●Socket button head screw × 1(M3x5mm)
●Socket button head screw × 6(M2.5x5mm)
●Slider Shaft × 1(Φ8x7x17.6)

Line Break - Medium Green

500DFC CCPM Metal Swashplate H50194
[H50194]
$32.99

Instruction:
●Designed specifically for DFC rotorhead system, improving DFC connecting rod’s strength and minimizing linkage detachment during extreme flight maneuvers.
●6061-T6 Aluminum alloy material and CNC processed。
●Suitable for T-REX 500 to install 500DFC Main Rotor Head Upgrade Set (H50181).

Specification:
●CCPM metal swashplate set × 1
●Long Linkage ball (M2.5×3) × 1(4.75×24.59mm)
●Linkage ball B (M2.5×3) × 2(Φ4.75×9.77mm)
●Linkage ball A (M2.5×3.5) × 2(Φ4.75×8.18mm)

Line Break - Medium Green

450DFC CCPM Metal Swashplate/Blue H45188QN
[H45188QN]
$27.99

Instruction:
●Designed specifically for DFC rotorhead system, improving DFC connecting rod’s strength and minimizing linkage detachment during extreme flight maneuvers.
●6061-T6 Aluminum alloy material and CNC processed。
●Suitable for T-REX 450 to install 450DFC Main Rotor Head Upgrade Set (H45162QN).

Specification:
●450PRO CCPM metal swashplate set × 1
●Linkage ball A(M2x2.5) × 4(Φ4.75×7.18mm)
●Long linkage ball(M2x2.5) × 1(Φ4.75×19.68mm)

Line Break - Medium Green

450DFC CCPM Metal Swashplate/Black H45188
[H45188]
$27.99

Instruction:
●Designed specifically for DFC rotorhead system, improving DFC connecting rod’s strength and minimizing linkage detachment during extreme flight maneuvers.
●6061-T6 Aluminum alloy material and CNC processed。
●Suitable for T-REX 450 to install 450DFC Main Rotor Head Upgrade Set (H45162).

Specification:
●CCPM metal swashplate set × 1
●Linkage ball A(M2x2.5) × 4(Φ4.75×7.18mm)
●Long linkage ball(M2x2.5) × 1(Φ4.75×19.68mm)

Source: Align Taiwan Webstore

Related posts:

  1. NEW: Product info added to the Align Taiwan website
  2. NEW: Align adds product info for Trex 600 and Trex 500 parts
  3. NEW: Align adds product info for Trex 700, 600, and 500
  4. PRODUCT INFO: Align Trex 250 Pro DFC Super Combo
  5. Check out the parts info added for Align Trex 800E . . . .
Advertisment

Subscribe to the post comments feeds or Leave a trackback