LX0439 – Nano CPX – Super Precise Std Kit Bearing Replacement Set
Price per Unit (piece) : $7.35

Lynx Heli Innovations is always looking for a better way of doing things.

Using our experience in bearing and the superior support of our Japan bearing vendor, Lynx has combined in one bag all Nano CPX standard heli kit bearing.

All Chrome Steel Alloy bearing in the bag are ABEC 5 precision class, the finest top quality of Lynx bearings bag is the best upgrade bearing pack for your Nano CPX.

FEATURES:

- Superior Japan made quality ABEC 5 precision class bearing increase fitting precision
- Chrome Steel Alloy assures the best bearing wear resistance fly after fly.
- Super precise fitting and geometrically tolerance eliminate vibes and increase fly precision.
- Direct replacement for your Nano CPX standard kit bearing.

TECHNICAL SPECIFICATION:

- Radial Bearing Material: Chrome Steel Alloy – ABEC 5 precision class – Made Japan

PACKING LIST:

- 4 x Radial Bearing 1x3x1 – Main Grip
- 2 x Radial Bearing 2x5x2 – Main Shaft

Line Break - Medium Orange

LX0423 – 450 X – Mini Protos – Tail Servo Mount – Red Devil Edition
Price per Unit (piece) : $17.99

This product was designed per 450X and is 100% compatible with Mini Protos as well

The 450 X is an amazing 450 class RTF helicopter. Lynx has looked closely at the helicopter’s performance, and we have found a number of areas for improvement. One issue we noted was the standard heli Tail Servo Mount.

These parts originally in plastic can’t clamp the boom as need, than vibe or tail wag can upend, reducing tail performance.

Lynx Heli Innovations has redesigned the standard 450 X plastic tail servo mount, using aluminum alloy.

We designed two clamps that once installed in the boom will support perfectly the tail servo. Like any Lynx part we aim for the strongest part with the lightest weight. We always look for upgrades that will increase helicopter performance.

The details and design of this tail servo mount add top performance and an exotic look to your 450 X tail system.

FEATURES:

- Direct replacement for the standard 450 X tail parts.
- Direct replacement for the standard Mini Protos tail parts.
- Optimized tail servo support protecting the servo case
- Increased rigidity of the tail servo improving tail system performance reducing wag and vibes.
- FEA (Final Elements Analysis) design assistance, achieving the lightest weight with the maximum strength.

TECHNICAL SPECIFICATIONS:

- Tail servo support material: Aluminum 7075-T6 – Red anodized finish.
- Screw material: Carbon steel 12.9 class
- Assembled weight (including hardware): 5.13g

PACKING LIST:

2 x CNC 450X – Mini Protos tail servo mount
4 x M2x6 Hex Cup Screw
2 x M2x8 Hex Cup Screw

Line Break - Medium Orange

LX61058 – MCPX – Lynx Plastic Main Blade 105 mm – White
Price per Unit (piece) : $5.00

Lynx Heli Innovations are now producing high quality main blades!
Our MCPX main blades have been designed from scratch to be the best main blade possible on this helicopter.
Thanks to our expert plastics consultant, we have optimized the weight and the rigidity using an exotic polymer blend.
The blades features incredible material stability that guarantees constant blade shape (no warping), even with extreme weather conditions (very hot, very cold). The result is a stiff blade giving the best helicopter performance under all conditions.
When flying the Lynx MCPX blades on your helicopter, you will immediately see the precision of the rotor disc and the resulting accuracy and agility during flight.

Materials:
Plastic Polymer Base PA66

Specifications:
Main blade MCPX
Blade length: 105mm
Average single blade weight: 2.15g

Line Break - Medium Orange

LX0433 – 130 X – CF Motor Mount Stiffener
Price per Unit (piece) : $4.75

Here at Lynx Heli Innovations we are helicopter pilots and fly the same models you do. We also watch what is happening at the field.

The 130X is an amazing micro class RTF helicopter. Lynx has looked closely at the helicopter’s performance, and we have found a number of areas for improvement. One issue we noted was the standard heli motor support flex under fly condition, generating bad main gear / pinion tooth mesh and disagreeable “stripping”.

After many design concept tests we choose the actual one: a super stiff CF plate that with special washers will fit in the standard frame and made sandwich with screws and motor. We supply special longer screw with M1.4 and M1.6 mm threat that made it useable with all actual motor option, from standard to upgraded one.

Carbon plate have center hole diameter as the plastic one and allow you to operate easily with motor and pinion installed, also the screw location have a slots.

This will be radically helpfully once you will make fine adjustment of the tooth mesh with different pinion (from 9 to 11).

Once installed become parts of the frame, giving the strength and rigidly that your 130X motor always looking for.

You will be amazed to feel the incredible stiffener difference and amazed to see your heli fly without strip anymore main gears.

An incredible small, but necessary upgrade for your 130X heli.

FEATURES:

- Optimized Motor clamp removing any motor / pinion movement for the best tooth mesh and best power transmission
- Super small and light
- Slot for pinion fine adjustment (plastic frame plate must reworked)
- Direct installation in standard 130X Frame.
- Special Brass washer supported for the ultimate fine adjustment and definitive motor clamp
- M1.4 and M1.6 mm thread screw supported for universal motor installation.

TECHNICAL SPECIFICATION:

- Motor Mount Material: Carbon Fiber 0.8 mm thickness
- Hardware Material: Carbon Steel Screws – Brass Washer
- Assembly weight: 0.2 g

PACKING LIST:

- 1 x CF Motor Mount
- 2 x PAN Head Screw M1.4×5
- 2 x PAN Head Screw M1.6×5
- 2 x Washer 1.6×3.5h0.3

Tips for best assembly: Before install the motor, rework with round fire or dremmel tools the 2 x holes pesent in the plastic motor support, and made it as Lynx CF motor mount.

Line Break - Medium Orange

LX0390 – 130 X – Canopy Pin – Silver
Price per Unit (piece) : $7.95

Lynx Heli Innovations has redesigned the 130X Canopy Pin using Aluminum 7075 and Carbon Steel.

Lynx Canopy Pins have beautifully “fusion-shape” design and thread lock as system for fastening in the frame.

Carbon steel threated rod and the two Aluminum pins will made lock the frame increasing the overall rigidity.

Small details make an important difference; FEA analysis software give us the support to determinate the best compromise between weight and stiffener, in order to assure the best fly performance without add any unnecessary weight.

FEATURES:

- Optimized Pin terminal size for the best canopy support
- Beautifully “fusion-shape” Lynx design
- Extra Threaded rod supplied as spare part.
- Direct replacement of standard 130X Canopy Pins.
- Carbon Pins supplied for easy tread installation.
- FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.

TECHNICAL SPECIFICATION:

- Canopy Pin Material: Aluminum 7075-T6
- Threaded Rod Material: Carbon Steel
- Assembly weight: 0.85 g

PACKING LIST:

- 2 x Aluminum Canopy Pin
- 2 x Threated Rod (one used as spare)
- 2 x Carbon Rod for easy installation

Line Break - Medium Orange

LX0395 – 130 X – One Way System – Titanium Main Shaft – Spare Set
Price per Unit (piece) : $15.65

Lynx offer a bag with 130X Titanium Main Shaft pre assembled as spare parts for Lynx 130X one way system p/n LX0317.

FEATURES:

- Spare Parts for Lynx p/n: LX0317 – 130 X – One Way Hub Assembly – Complete Set

TECHNICAL SPECIFICATION:

- Main Shaft Material: Titanium G6

PACKING LIST:

- 1 x One Way Titanium main shaft pre-assembled with Lynx collar

Line Break - Medium Orange

LX0317 – 130 X – One Way Hub Assembly – Complete Set
Price per Unit (piece) : $37.65

Lynx Heli Innovations has designed autorotation system for 130X adding one way system and increasing 1 mm the main gear thickens.

Lynx autorotation system has Aluminum Hub, Reinforced CNC Main Gear and Titanium Main Shaft.

Smooth power transmission and Heavy Duty specification will support your 130X Overpowered need to next level.

We spent time optimizing the design and fly testing to achieve the required strength and resistance with final design without compromise.

We are pilots, and we demand a heli that can support any over-stress fly condition.

FEATURES:

- Autorotation features.
- Tecnopolymer Precise and reinforced CNC main gear assures best wear resistance and perfect tooth mesh.
- Super precise Main gear concentricity for smooth and silent power transmission
- Main gear thickness 3mm and special “cross radius” cut design for the ultimate main gear rigidity
- Titanium G6 Main Shaft increase frame rigidity – pre assembled with Lynx collar.
- One way hub with Japan brand one way bearing and super precise brass bushing assure perfect geometrically assembly and no play.
- Fine shims spacer for the ultimate assembly and vertically play free function
- Direct replacement of std 130X main gear / main shaft system
- FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.

TECHNICAL SPECIFICATION:

- Main Shaft Material: Titanium G6
- One Way Hub Material: Aluminum 7075-T6
- One Way Bearing: Chrome Steel Japan brand
- Assembly weight: 10.2 g

PACKING LIST:

- 1 x One Way Titanium main shaft pre-assembled with Lynx collar
- 1 x Main Gear assembled with One Way Hub

Line Break - Medium Orange

LX0396 – 130 X – One Way System – Main Gear – Spare Set
Price per Unit (piece) : $12.35

Lynx offer a bag with 130X CNC Main Gear as spare parts for Lynx 130X one way system p/n LX0317.

FEATURES:

- Spare Parts for Lynx p/n: LX0317 – 130 X – One Way Hub Assembly – Complete Set

TECHNICAL SPECIFICATION:

- Main Gear Material: Tecnopolymer base POM

PACKING LIST:

- 1 x One Way CNC main gear
- 4 x M1.4×4 PAN Head Screw

Subscribe to the post comments feeds or Leave a trackback