NEW: Products from VJ, K&S, and M.Speed Announced

Our friends at Polaris Export shared some new products with us. These new products range from landing skids to engine tuning.

Continue through to get the details of these new products.

KS-2816
Zenoah 29cc Bore-up Kit (Limited Edition)
List Price ¥17,500

Limited Amount: only 50pcs. No re-stock after sold-out.
Please order early to make sure you get it.
26cc Zenoah Gasoline Engine is commonly used for JR GSR260Z helicopter. This kit boosts 26cc Zenoah Gasoline Engine’s displacement to 29cc. By boosting the displacement, the torque power is increased even further. This bore-up kit replaces parts from the head to piston plug, a must-have for pilots who want to overhaul their engines.

VJ-022
SYE12 Body Set (VJ Pink paint)
List Price ¥98,500

Compatible with: SYE12
Designed by: Original design by VJ Product, Mr. Minoru Kobayashi
Color: Pink version
The paint is from the Flying Monkey brand, the highest-quality RC paint in Japan.
(JPN number is not painted, the picture show Minoru Kobayashi’s JPN number)

Set includes:
JR-82341 SYE12 Canopy (List Price 12,000 JPY)
JR-82342 SYE12 Rear Body Set (List Price 20,000 JPY)
JR-61550 Carbon Vertical Fin (List Price 3,800 JPY)

VJ-018
Lipo Balancer Connector Sockets (2pcs)
List Price ¥950

Please use double-stick tape or other adhesives to attach VJ Lipo Balancer Connector Sockets. Balancer connector is a very important part. If it intertwines with motor or other parts during the flight and hits the wet ground, it may result into big troubles. To protect your aircraft against such risks, please use this product.

Suitable for most Lipo batteries currently in the market (eg. Thunder Power, Hyperion, Hobby King).
However, if the balancer cord is extremely short, it may not work.

VJ-012
Lightweight / Low High Skid FAI (for 30-90 Size) – White Paint
List Price ¥3980

There has never been any low skid like this. Able to fit in many kinds of helicopters between 30-90 size regardless of model or even manufacturer, this lightweight low skid offers you impressive flexibility. To minimize air resistance, the diameter of skid pipes has been reduced from 8mm to 6mm.

Set Includes:
* 2 x White Resin Brace
* 2 x 6mm Pipe Aluminum Skid
* 4 x White Skid Cap
* 4 x Set Bolt M3

Specs:
*Height: 30mm
*Overall Width: 176 mm
*Weight: 81g
*Brace Mounting Holes Pitch:70mm-84mm

Applicable Products:
Align: T-REX 600 (modification may be required for some products) T-REX 700
JR: AS50 series, Vibe50, Vibe50 NEX, Vibe90 SG, AS90 Series, SY series, E12 Series
Hirobo: SDX serires, Eagle series
Curtis Youngblood: Rave 90

KS-2812
K&S Magic Strap (50cm, 2pcs/pack)
List Price ¥950

The buckle part of this product allows you to adjust the belt length. Remove the 3 screws and cut the belt to the length you desired, then put back the screws, done. Not too long, not too short, you can make the strap fit perfectly to the size of the item (e.g. lipo battery) you want to fix.

Set includes:
Strap x2pc, Backup buckle x1set

KS-2813
Magic Strap Buckles (2 sets)
List Price ¥380

Replacement buckles for KS-2812 Magic Strap. They can also be used on JR Magic Strap (XL) or other straps with width around 25mm. Cut the strap to the desired length, and secure by these buckles.

MS-OS105HZR
M.Speed OS-105HZ-R Turning fee
List Price ¥18,000

The list price is only the fee for turning service, the engine should be purchased separately.

Turning details
Crankshaft: changes the shape of the passenger port and the counter.
Cylinder liner: changes the shape of port and the exhaust timing.
Piston: reduces weight.
Connecting Rod: burnished and polished.
Lead TIme: 2 weeks
·
* While maintaining the strong torque, M.Speed turning improves the original engine by accelerating the rotation speed and sharpening the response.

MS-YS120SR
M.Speed YS-120SR Turning fee
List Price ¥18,000

The list price is only the fee for turning service, the engine should be purchased separately.

Turning details
Crankshaft: changes the shape of the passenger port and the counter.
Cylinder liner: changes the shape of port and the exhaust timing.
Piston: reduces weight.
Connecting Rod: burnished and polished.
Lead TIme: 2 weeks

* While maintaining the strong torque, M.Speed turning improves the original engine by accelerating the rotation speed and sharpening the response.

Source: Polaris Export

Advertisment

Subscribe to the post comments feeds or Leave a trackback