Note: Please check with your local hobby shop or favorite online retailer for availability and pricing. For those hobby shops or online retailers in the United States who would like to carry these or any other Align products please contact either of the following Align Distributors to place your order.

Heli Wholesaler

Assurance RC Distributor

T-REX 500PRO DFC Combo RH50E02XW
[RH50E02XW]
$790.99

Specification(T-REX 500 PRO DFC) :
●Features
●Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
●Unique carbon composite technology which effectively strengthen the weak areas and simplify electronics installation.
●Servos can be mounted directly onto frame without mounting nuts.
●Rear in-frame rudder servo mount design for centralize 3G for best 3D performance.
●Equipped with MX series high efficiency brushless motor, with heatsink style casing and embedded fan to dramatically improve cooling and increase power output.
●Unique fast release gyro and receiver mount design for fast removal and sturdy attachment.
●Uses high precision slant tooth (helical) main gear, with higher load sustainability and lower noise output.
●Brand new tail gear box with higher material quality and easy maintenance.
●High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
●Highly efficient shaft driven tail system which effectively reduce power loss found on belt driven system, and at the same time increase performance during flight.
●Brand new 4mm carbon rudder control rod and metal rudder pitch bell crank to further improve the rudder locking effect and controllability.
●New style battery mounting platform to strengthen frame as well as provide mount for electronic speed controller.
●New style lower CG landing gear.
●Newly styled aerodynamically canopy for the ultimate fit, making the helicopter stand out.
●Best tail gear ratio to minimize vibration caused by high speed operation of main blades, bringing the best tail locking power.
●High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Specification(T-REX 500 PRO DFC) :
● Length: 868mm
● Height: 275mm
● Main Blade Length: 425mm
● Main Rotor Diameter: 978mm
● Tail Rotor Diameter: 206mm
● Motor Drive Gear:12T
● Main Drive Gear:134T
● Autorotation Tail Drive Gear: 145T
● Tail Drive Gear: 36T
● Drive Gear Ratio: 1:11.17:4.03
● Weight(With Motor): 1210g

Accessories:
●T-REX 500PRO DFC Kits Set X1
●425 3G Carbon fiber blades X1
●500MX Brushless Motor(1600KV) X1
●DS515M Digital servo X3
●DS525M Digital servo X1
●RCE-BL70G Brushless ESC X1

Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●6S Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
●Digital Pitch Gauge
●3GX Flybarless System

Line Break - Medium Yellow

DS525M Digital Servo HSD52501
[HSD52501]
$41.99

Instruction:
●Coreless Motor Design for fast speed, high efficiency, and low power consumption.
●10 Bits signal resolution for smooth movements.
●Response time of 0.08s/60°. High strength composite alloy gears with high precision and durable structure characteristics.
●Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.
●Supports digital & analog control signal.
●Powerful and precise servo suitable for T-Rex 500 CCPM cyclic and rudder servo use.

Specification:
●Stall torque:
2.4kg.cm(4.8V)
3.0kg.cm(6.0V)
●Motion speed:
0.08sec/60°(4.8V)
0.06sec/60°(6.0V)
●Rating voltage:DC 4.8-6V
●Temperature range:-20°C~+60°C
●Dimension:35.1 x 15.1 x 29mm
●Weight:29g
●1520μs standard band

Accessories:
●Servo rudder piece x 3
●Set screw x 1
●Rubber damper x 4
●Brass grommet x 4
●Socket button head tapping screw(T2.6x12mm) x 4
●D5AF Servo horn x 1

Line Break - Medium Yellow

DS515M Digital Servo HSD51501
[HSD51501]
$41.99

Instruction:
●High rigidity, shock resistant metal gears.
●Coreless Motor Design for fast speed, high efficiency, and low power consumption.
●10 Bits signal resolution for smooth movements.
●Fast speed with high torque of 5.0kg/cm. High strength composite alloy gears with durable structure characteristics.
●Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.
●Supports digital & analog control signal.
●Powerful and precise servo suitable for T-Rex 500 CCPM cyclic use.

Specification:
●Stall torque:
4.0kg.cm(4.8V)
5.0kg.cm(6.0V)
●Motion speed:
0.12sec/60°(4.8V)
0.101sec/60°(6.0V)
●Rating voltage:DC 4.8-6V
●Temperature range:-20°C~+60°C
●Dimension:35.1 x 15.1 x 29mm
●Weight:29g
●1520μs standard band

Accessories:
●Servo rudder piece x 3
●Set screw x 1
●Rubber damper x 4
●Brass grommet x 4
●Socket button head tapping screw(T2.6x12mm)x 4
●D5AF Servo horn x 4

Line Break - Medium Yellow

DS615/655 Upper/Lower Cover HSP61502
[HSP61502]
$4.99

Instruction:
●Apply for ALIGN DS615/655 Servo

Specification:
●DS615/655 servo upper cover x 1
●DS615/655 servo lower cover x 1
●Screw x 4
●O-Ring x 4

Line Break - Medium Yellow

700N DFC Painted Canopy HC7302
[HC7302]
$95.99

Instruction:
●Use for T-REX 700 Nitro DFC.

Specification:
●GF painted canopy x 1
●Canopy nut x 4(Φ2.7xΦ12x6mm)
●Canopy protector x 4
●R4 pin x 4

Line Break - Medium Yellow

800E Aerial Photography Landing Skid Nut H80F002XXW
[H80F002XXW]
$7.99

Instruction:
●Use for H80F001XXW 800E Aerial Photography Landing Gear Assembly.

Specification:
●Material:silica gel
●Quantity:4 pcs

Line Break - Medium Yellow

700DFC Canopy Mounting Bolt H70B001XXW
[H70B001XXW]
$7.99

Instruction:
●6061-T6 Aluminum alloy material and CNC processed。
●Use for T-REX 700E DFC.

Specification:
●Canopy mounting bolt x 4(6×14.5mm)
●Socket screw x 4(M3x8mm)

Line Break - Medium Yellow

DS615 Servo Gear Set HSP61501
[HSP61501]
$26.99

Instruction:
●Apply for ALIGN DS615 Servo

Specification:
●DS615 gear G1x1
●DS615 gear G2x1
●DS615 gear G3x1
●DS615 gear G4x1

Line Break - Medium Yellow

DS655 Servo Gear Set HSP65502
[HSP65502]
$26.99

Instruction:
●Apply for ALIGN DS655 Servo

Specification:
●DS655 gear G1x1
●DS655 gear G2x1
●DS655 gear G3x1
●DS655 gear G4x1

Line Break - Medium Yellow

DS515/525 Upper/Lower Cover HSP51503
[HSP51503]
$4.99

Instruction:
●Apply for ALIGN DS515/525 Servo

Specification:
●DS515/525 servo upper cover x 1
●DS515/525 servo lower cover x 1
●Screw x 4

Line Break - Medium Yellow

Metal Belt Drive Tail Rotor Shaft Assembly H60T001XXW
[H60T001XXW]
$7.99

Instruction:
●T-REX metal tail rotor shaft assembly features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight.
●Use for H60253 600 Tail Belt Unit.

Specification:
●Metal drive pulley(9T) x 1
●Metal pulley cover x 2
●Tail rotor shaft x 1(Φ5x62mm)

Line Break - Medium Yellow

DS515 Servo Gear Set HSP51502
[HSP51502]
$21.99

Instruction:
●Use for ALIGN DS515 Servo.

Specification:
●DS515 Metal gear G1x1
●DS515 Metal gear G2x1
●DS515 Metal gear G3x1
●DS515 Metal gear G4x1
●DS515 Metal gear G5x1

Line Break - Medium Yellow

DS525 Servo Gear Set HSP52501
[HSP52501]
$21.99

Instruction:
●Use for ALIGN DS525 Servo.

Specification:
●DS525 Metal gear G1x1
●DS525 Metal gear G2x1
●DS525 Metal gear G3x1
●DS525 Metal gear G4x1
●DS525 Metal gear G5x1

Line Break - Medium Yellow

Elevator Servo Mount HN7074
[HN7074]
$5.99

Instruction:
●Use for T-REX 700 Nitro Pro / 700E.

Specification:
●Elevator servo mount x 1
●Socket buton head self tapping screw x 4(T2.6x14mm)

Source: Align Taiwan Webstore

Related posts:

  1. NEW PRODUCTS: For Align Trex 700/550/500
  2. New products added by Align for Trex 700 and 600 helis
  3. PRODUCT INFO: New parts and accessories added for Align helis
  4. PRODUCT INFO: New products for Align helis
  5. Products added to the Align Taiwan webstore for Trex 800, 700, and 450 series
Advertisment

Subscribe to the post comments feeds or Leave a trackback