We’ve been waiting for this! Align has released details of the Align Trex 100 Combos and info for spare parts. Click to get all the scoops for the combos and the spare parts to keep your Trex 100 flying.
T-REX 100S Combo KX022003
[KX022003]
$119.99
Instructions:
Features
●Utilizes AFHDS 2.4Ghz frequency hopping technology for interference avoidance and stability.
●Radio transmitter consist of computer simulator output compatible with 3rd party R/C airplane and helicopter simulation software, and includes an adapter cable for computer simulator.
●Supports MODE 1/MODE 2/ MODE 3 controller modes.
●Design encompasses both agility and stability characteristics.
●Utilizes hobby grade micro servos and reinforced frame design for flight stability, crash sustainability, and longevity.
●NiMh/Lipo battery charging capability, capable of charging while flying.
●Convenient USB charge port, allowing PC USB port or any portable 5v USB power adapters to be used for charging the transmitter NiMH battery.
●Charging status and power capacity display.
●Blue backlit LCD display panel.
●5-in-1 electronics board consisting of receiver, ESC, headinglock gyro, servos, and mixing functions.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Specification:
●Length:202mm
●Height:82mm
●Main Rotor Diameter:192mm
●Tail Rotor Diameter:36mm
●Weight(w/o power system):27.8g
●Flying Weight:Approx 32g
Accessories:
● T-REX 100S Kits set x 1
● AT 100 Transmitter x 1
● 3.7V / 150mAh Li-Polymer Battery x 2
● 1.5V Carbon-Zinc Battery x 4
● Simulator Cable x 1
● CD-ROM x 1
● Philips Screwdriver x 1
T-REX 100S Super Combo KX022005
[KX022005]
$139.99
Instructions and Specifications are the same as the Align Trex 100S Combo. Here is what you get with the Align Trex 100S Super Combo -
Accessories:
● T-REX 100S Kits set x 1
● AT 100 Transmitter x 1
● 1.2V / 1600mAh Ni-MH Chargeable Battery x 4
● 3.7V / 150mAh Li-Polymer Battery x 2
● Simulator Cable x 1
● CD-ROM x 1
● CH100 Lipo Charger x 1
● USB Cable x 1
● Philips Screwdriver x 1
100 Logic board H11023
[H11023]
$40.99
Specification:
●AT100 Logic board x 1
●Servo Horn x 2
●Round headed cross self tapping screw(T1.4×2.5mm) x 2
H63 Bearing H11021
[H11021]
$3.99
Specification:
●H63 Bearing(Φ3xΦ6x2mm) x 2
100 Screw Parts H11020
[H11020]
$3.99
Specification:
●Flybar axil pin x 1
●Damper x 1
●Damper Spacer x 4
●Damper Rubber x 2
●Round headed cross self tapping screw(T1.4×2.5mm) x 1
●Round headed cross self tapping screw(T1.4x4mm) x 4
●Round headed cross self tapping collar screw(M1.2×3.2mm) x 2
100 Linkages H11019
[H11019]
$4.99
Specification:
●Ball Link A x 2
●Ball Link B x 2
●Ball Link x 2
●Linkages x 2
100 Complete Tail Assembly H11015
[H11015]
$8.99
Specification:
●Tail Boom(2.2×2.9x115mm) x 1
●Tail Motor mount x 1
●Tail Motor x 1
●Colored wire assembly x 1
●Heat shrink tube x 2
100 Vertical Stabilizer H11013
[H11013]
$3.99
Specification:
●Vertical Stabilizer x 1
100 Main Shaft H11007
[H11007]
$4.99
Specification:
●Main Shaft(Φ1.6xΦ3×45.8mm) x 2
100 Main Motor set H11012
[H11012]
$7.99
Specification:
●Main Motor set x 1
100 Main Drive Gear H11011
[H11011]
$4.99
Specification:
●Main Drive Gear x 1
100 Landing Skid H11010
[H11010]
$6.99
Specification:
●Landing Skid x 1
●Landing gear assembly and battery contact plates x 2
●Battery connection harness x 1
100 Main Frame H11009
[H11009]
$6.99
Specification:
●Main Frame x 1
100 Swashplate H11008
[H11008]
$5.99
Specification:
●Swashplate x 1
100 Tail Blade H11014
[H11014]
$3.99
Specification:
●Tail Blade x 2
●Length:37.2 mm
●Weight:0.2g/single
100 Flybar Rod assembly H11006
[H11006]
$5.99
Specification:
●Flybar Rod x 1
●Arm x 2
●Head Collar Screw(M1.2×3.2mm)x 2
●Spacer x 2
100 Rotor Housing H11005
[H11005]
$6.99
Specification:
●Rotor Housing x 1
●Damper x 1
●Damper Spacer x 2
●Damper Rubber x 2
●Washout Base x 1
●Round headed cross self tapping screw(T1.4×2.5mm) x 1
100 Main Blades H11001
[H11001]
$4.99
Specification:
●Shape: None Symmetrical wing
●Length:103.4 mm
●Weight: 2.5g/set
●Main Blades x 1 set
●Round headed cross self tapping screw(T1.4x4mm) x 2
100 Painted Canopy HC1002
[HC1002]
$9.99
Specification:
●Painted canopy x 1
●Canopy nut x 4
CH100 Li-po Charger HEC10001
[HEC10001]
$22.99
Specification:
●Charger x 1
●USB Cable x 1
3.7V/150mAh/15C HBP15002
[HBP15002]
$16.99
Specification:
●3.7V/150mAh/15C Li-Polymer Battery x 2
3.7V/150mAh/15C HBP15001
[HBP15001]
$9.99
Specification:
●3.7V/150mAh/15C Li-Polymer Battery x 1
Source: Align
Related posts:
- NEW: Align Flybarless Parts for Trex 550 and Trex 700
- FBL Kit Details and Spare Parts Info Added
- NEW: Align Trex 100X Super Combo Announced
- DETAILS: New Align Parts information Added
- Parts information added for Align Trex 100 and Trex 250
Christian Louboutin shoes run small and narrow. All the time add 30.5 to your US measurement (in case you are US 8, you need 38.5 in Louboutin’s). If your feet are on the wide aspect, add 31. When you’ve got wider toes, 120 mm heel pump won’t be such a good idea for you, but slides and platforms will work well. Ask the seller. If this seller sells a number of Louboutins, they understand how they run and have suggestions from customers.