The team at Quick UK recently added some products for use on the Trex 600/700. Not only improving performance, but giving that bling factor to any Trex 600/700 heli. Click on to read about these products.

QuikUK Header

Trex 700 – 3D Tailboom Clamp & Pushrod Guide
part number: TX7T-22

Lightweight one piece tail clamp with integrated low friction PTFE support bush suitable for carbon tail rotor control pushrod.

Designed to suit 5.5mm diameter carbon tail pushrod (part # TX7T231)

Component weight 8.60g

Available in Black, Silver, Red and Blue anodised finish.

1 Trex 700 Tail Pushrod Guide

TREX 600/700 – M3 Shouldered Screw Caps
part number: TXF-07

Alloy shouldered M3 screw caps suitable for Trex 600 and 700 models, allows regular size M3 cap head screws to be used on frame sets in place of the original Align shouldered screws.

Supplied in packs of 10 complete with set of M3x10mm high tensile socket heat screws

Available in Black, Red, Blue and Silver

2 Trex 600_700 - M3 Shoulder Screw Caps

NHP – 690mm Carbon “Agressor” Blades
part number: NHP6965

NHP have developed a new 69cm symmetrical rotor blade designed for aggressive 3D flying.

Big improvements in torsional and longitudinal stiffness with revised weight distribution have dramatically sharpened the pitch and cyclic response without compromising the fast flight stability and auto performance of the blade.

A wider chord, 65mm, allows the blade to make best use of the increased power from modern glow and electric motors, whilst the tapered thickness section has less drag giving the pilot improved performance/duration particularly with electric models.


Length from bolt hole to tip – 690mm

Chord – 65mm

Root thickness – 12.0mm (Spacers included for 14mm fitment)

Root bolt size – 4.0 / 5.0mm

Weight – Approx 175g (each)

3 NHP - 690mm Carbon Agressor Blades

Source: Quick UK

Subscribe to the post comments feeds or Leave a trackback