New Parts Released for Your Heli

Torque Tube H55034A
$13.99

Instruction:
● Use for T-REX 550E.
Specification:
● Torque tube x 1
● Bearing MR148ZZ x 1(Φ8xΦ14x4mm)

6S1P 22.2V 3300mAh/40C/A HBP33001
$127.99

[View with PicLens]

Specification:
● This Li-poly battery is using series/balancing design, features high efficient and high discharge, use a inspection machine to match packs, suitable for TREX 500 ~TREX 600 series.
● TREX 600E PRO suggest to use two 6s 22.2V lipo batteries connected in series for having both power and flight duration.
● Max Continuous Discharge: 40C, Burst Discharge: 50C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.
● Recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

● Output:22.2V(6S1P)3300mAh 73Wh
● Dimension:43x143x39.5mm
● Weight:514g

NOTE:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can’t exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire.

UH-60 500 Scale Fuselage HF5006
$410.99

[View with PicLens]

Instructions:
● The UH-60 Blackhawk helicopter has been popularized by Hollywood productions, leaving fans with impression of its role as wartime payload carrier. This highly detailed Blackhawk scale fuselage with camouflage paint scheme is a great opportunity for the collectors and enthusiasts alike.
● The complete kit includes special carbon side frames, scale 4 blades rotor system, scale elevated tail rotor system, and even functional cabin doors. The detailed scale features of this fuselage surely will make any imaginary movie scenario come true. Time to send your Blackhawk out to the battle field for your own search and rescue mission!
● 3G flybarless system is not included with this kit, and need to be purchased separately.
● UH-60 Scale Fuselage suitable for T-Rex 500 models.

Features:
● Special carbon side frames
● Elevated tail rotor assembly
● Scale landing gear assembly
● Functional cabin doors

Specification:
● Body length:1085mm
● Body width:244mm
● Body high:265mm
● Weight:890g

Accessory:
● Fiberglass main frames (R/L) x 2
● Tail boom (φ15xφ16x152mm) x 1
● Torque tube (154mm) x 1
● Linkage rod (B) (φ2x180mm) x 1
● Plate x1
● Torque tube drive gear assembly x 1
● Angled tail transmission assembly x 1
● Tail rotor control arm x 1
● Linkage ball A (T2.6×3.5) x 2
● Collar screw x 1
● Ball link x 4
● One-way Bearing Grease x 1
● Long Torque Tube Drive Gear x 2

Hook & Loop Fastening Tape HOB00001
$3.99