500 Scale Fuselage Short Tail Boom HF5010
$19.99
Instruction:
● Suitable for UH-60 500 Scale Fuselage(HF5006).
● Suitable for AH-1 500 Scale Fuselage(HF5007).
Specification:
● 500 Torque tube end x 2
● 500 UH-60 Tail boom(Φ15xΦ16x152mm) x 1
● 500 UH-60 Torque Tube x 1
● 500 UH-60 tail linkage B(Φ2x180mm) x 1
● Ball Link x 2
500 Scale Fuselage Angled Tail Transmission Set HF5011
$8.99
Instruction:
● Suitable for UH-60 500 Scale Fuselage(HF5006).
● Suitable for AH-1 500 Scale Fuselage(HF5007).
Specification:
● 500 Tail Transmission(L) x 1
● 500 Tail Transmission(R) x 1
● Socket button head self tapping screw(T2.6x6mm) x 5
● 500 UH-60 Tail Long Umbrella Gear x 2
● Bearing MR128(Φ8xΦ12×2.5mm) x 4
● Bearing MR52ZZ(Φ2xΦ5×2.5mm) x 2
● 500 UH-60 Tail Rotor Control Arm x 1
● Linkage Ball A(T2.6×3.5) x 2
● Collar screw(M2x12mm) x 1
● Washer x 3
500 Scale Fuselage Tail Gear Plate HF5012
$21.99
Instruction:
● Suitable for UH-60 500 Scale Fuselage(HF5006).
● Suitable for AH-1 500 Scale Fuselage(HF5007).
Specification:
● 500 UH-60 Tail Torque Tube(L) x 1
● 500 UH-60 Tail Torque Tube(R) x 1
● Socket button head self tapping screw(T2.6x8mm) x 5
● 500 Tail Rotor Shaft x 1
● Bearing 684ZZ x 2(Φ4xΦ9x4mm)
● Bearing MR128(Φ8xΦ12×2.5mm) x 2
● 500 Long Umbrella Gear(25T) x 1
500 Scale Fuselage Long Umbrella Gear HF5013
$12.99
Instruction:
● Suitable for UH-60 500 Scale Fuselage(HF5006).
● Suitable for AH-1 500 Scale Fuselage(HF5007).
Specification:
● 500 Long Umbrella Gear x 4
500 Scale Fuselage Torque Tube Drive Gear HF5014
$12.99
Instruction:
● Suitable for UH-60 500 Scale Fuselage(HF5006).
● Suitable for AH-1 500 Scale Fuselage(HF5007).
Specification:
● 500 Torque Tube Drive Gear x 1
● Bearing 684ZZ(Φ4xΦ9x4mm) x 2
● Socket button head screw(M2.5x5mm) x 1
● Washer(Φ2.6xΦ5.8×0.6mm) x 1
3GX Programmable Flybarless System HEG3GX01
$238.99
Instruction:
● Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
● 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba’s S-BUS system.
● Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
● Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
● Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
● With 3GX’s built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
● A library of pre-configured 3GX settings specifically available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopters.
● Three levels of flight mode is available on the 3GX to provide different feels from beginners to advanced pilots.
● Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
● 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
● Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
● 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
● With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
● 3GX’s rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter’s rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
● Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.
Specification:
● Operating Temperature:-10~60 degree
● X and Y axis Operating Angle Range:-300~+300 degree
● Z axis Operating Angle Range:-600~+600 degree
● Size:36.5×25.2×15.6 mm Size
● Weight11g Weight
● Supports Wide/Narrow Bandwidth Digital and brushless servos
● Spektrum and JR Satellite antennas support (Replaces original factory receiver)
● Futaba S.BUS system support
● Built in governor function
● Maximum working voltage:8.5V
● Compatible with 1024/2048 resolution Spektrum receivers
● Supports 90/120/135/140 CCPM swashplates
● Field setup without the use of a PC
● Compatible with 2 to 5 blades rotor heads
● Support up to 6 servos
● Automatic servo type recognization
Content:
● USB Link cable set x 1
● USB extension cable x 1
● Signal wire x 3
● Bind Plug x1
● 3GX Sticker x1
● Installation CD x 1
● Correction of TREX 600EFL 3GX manuals:(Click me)
100 Tail Motor Assembly H11026
$4.99
Instruction:
● Use for T-REX 100.
Specification:
● Tail Motor x 1
600MX Brushless Motor(510KV) RCM-BL600MX
$147.99
Instruction:
1. The 600MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
2. The 600MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
3. Maintenance free, high torque, high efficiency, stable and quiet.
4. High-speed ball bearings, powerful magnetic outrunner rotor.
Specification:
● Input voltage:DC11.1V-50.4V
● Max continuous current:75A/125A(5sec)
● Max output power:3300W/5500W(5sec)
● KV value:510KV
● Dimension: spindle Φ6xΦ45x59mm
● Weight: 340g (prox.)
Accessories:
● Socket screw(M3X10)X4
● Washer(Φ3XΦ8X1)X4
● ALIGN standard 4mm gilt terminal x 3
Source: Align Taiwan Web Shop
Be The First To Comment
Related Post
Please Leave Your Comments Below