I spoke with our good friend Lucien Miller about their offerings of combos for the Next Level line. Lucien said customers were asking what they would need to get their machine in the air. Well, to help everyone out, Lucien has come up with combos for both the 650 and 500 sizes in standard and hi-power versions.

Continue through to view the combo offerings for the Next Level line.

Line Break - Medium Red

Next Level Multi-Rotors

Next Level 650mm Quad, Hi-Power Combo with Cobra Motors
[NL-650QHPCC]
$539.99

This Next Level 650mm Quad Rotor Combo Kit is the High power system featuring Cobra 2221/16 motors that is designed for pilots that simply what to sport fly their Quad-Rotor craft and have plenty of power available for heavier cameras and FPV gear. For pilots that do need this much power, you should use select the 650 Quad Standard Power Combo Kit that is also available on our site.

This Combo Kit contains all of the parts needed to assemble the 650mm Quad Rotor frame, except for the battery, receiver and Flight Controller Board, which need to be purchased separately.

Included in this High Power Combo Kit are the following items:

1 – Next Level 650mm Quad Rotor Frame Kit
4 – Cobra 2221/16 Brushless Motors, 940 Kv
4 – Next Level 30 Amp Speed Controllers
4 – Next Level 200mm Motor Lead Extension Kits
4 – GemFan 11×4.7 Carbon-Filled Multi-Rotor Props
4 – GemFan 11×4.7R Carbon-Filled Multi-Rotor Props
2 – Sets of 3.5mm Bullet Connectors

Also included in the Combo Kit is a 4-to-1 Power Harness that allows you to run all 4 speed controllers from one battery. The power harness has a male Deans type power connector on one end, and a set of 4 3.5mm Male and Female bullet connectors at the other end. In addition to the bullet connectors, there is a male JST power connector for providing power to other items such as FPV gear or LED Nav lights.

Line Break - Medium Red

Next Level 650mm Quad, Standard Combo with Scorpion Motors
[NL-650Q-SPCS]
$589.99

This Next Level 650mm Quad Rotor Combo Kit is the standard power system featuring Scorpion SII-2215-1127 motors that is designed for pilots that simply what to sport fly their Quad-Rotor craft and possibly hang a GoPro camera on it or light FPV gear some time in the future. For pilots that want to also use heavier cameras or other additional options, you should use select the 650 Quad High Power Combo Kit that is also available on our site.

This Combo Kit contains all of the parts needed to assemble the 650mm Quad Rotor frame, except for the battery, receiver and Flight Controller Board, which need to be purchased separately.

Included in this Standard Power Combo Kit are the following items:

1 – Next Level 650mm Quad Rotor Frame Kit
4 – Scorpion SII-2215-1127 Brushless Motors, 1127 Kv
4 – Next Level 30 Amp Speed Controllers
4 – Next Level 200mm Motor Lead Extension Kits
2 – GemFan 10×4.5 Green Multi-Rotor Props
2 – GemFan 10×4.5R Green Multi-Rotor Props
2 – GemFan 10×4.5 Black Multi-Rotor Props
2 – GemFan 10×4.5R Black Multi-Rotor Props
2 – Sets of 3.5mm Bullet Connectors

Also included in the Combo Kit is a 4-to-1 Power Harness that allows you to run all 4 speed controllers from one battery. The power harness has a male Deans type power connector on one end, and a set of 4 3.5mm Male and Female bullet connectors at the other end. In addition to the bullet connectors, there is a male JST power connector for providing power to other items such as FPV gear or LED Nav lights.

Line Break - Medium Red

Next Level 650mm Quad, Standard Combo with Cobra Motors
[NL-650QSPCC]
$509.99

This Next Level 650mm Quad Rotor Combo Kit is the standard power system featuring Cobra 2217/20 motors that is designed for pilots that simply what to sport fly their Quad-Rotor craft and possibly hang a GoPro camera on it or light FPV gear some time in the future. For pilots that want to also use heavier cameras or other additional options, you should use select the 650 Quad High Power Combo Kit that is also available on our site.

This Combo Kit contains all of the parts needed to assemble the 650mm Quad Rotor frame, except for the battery, receiver and Flight Controller Board, which need to be purchased separately.

Included in this Standard Power Combo Kit are the following items:

1 – Next Level 650mm Quad Rotor Frame Kit
4 – Cobra 2217/20 Brushless Motors, 960 Kv
4 – Next Level 30 Amp Speed Controllers
4 – Next Level 200mm Motor Lead Extension Kits
2 – GemFan 10×4.5 Green Multi-Rotor Props
2 – GemFan 10×4.5R Green Multi-Rotor Props
2 – GemFan 10×4.5 Black Multi-Rotor Props
2 – GemFan 10×4.5R Black Multi-Rotor Props
2 – Sets of 3.5mm Bullet Connectors

Also included in the Combo Kit is a 4-to-1 Power Harness that allows you to run all 4 speed controllers from one battery. The power harness has a male Deans type power connector on one end, and a set of 4 3.5mm Male and Female bullet connectors at the other end. In addition to the bullet connectors, there is a male JST power connector for providing power to other items such as FPV gear or LED Nav lights.

Line Break - Medium Red

Next Level 500mm Quad, Hi-Power Combo with Scorpion Motors
[NL-500QHPCS]
$569.99

This Next Level 500mm Quad Rotor Combo Kit is the high power system featuring Scorpion SII-2215-900 motors that is designed for pilots that what to sport fly their Quad-Rotor craft and have enough power to install a larger camera and FPV Gear. For pilots that simply want to sport fly their quad without adding FPV gear or other additional options, you should use select the 500 Quad Standard Power Combo Kit with Scorpion motors that is also available on our site.

This Combo Kit contains all of the parts needed to assemble the 500mm Quad Rotor frame, except for the battery, receiver and Flight Controller Board, which need to be purchased separately.

Included in this High Power Combo Kit are the following items:

1 – Next Level 500mm Quad Rotor Frame Kit
4 – Scorpion SII-2215-900 Brushless Motors, 900 Kv
4 – Next Level 30 Amp Speed Controllers
4 – Next Level 100mm Motor Lead Extension Kits
2 – GemFan 10×4.5 Green Multi-Rotor Props
2 – GemFan 10×4.5R Green Multi-Rotor Props
2 – GemFan 10×4.5 Black Multi-Rotor Props
2 – GemFan 10×4.5R Black Multi-Rotor Props
2 – Sets of 3.5mm Bullet Connectors

To maintain good maneuverability and performance, we recommend that the maximum flying weight of this setup should be no more than 60% of the total available thrust. For this power system, that would be 80 ounces maximum take-off weight.

Also included in the Combo Kit is a 4-to-1 Power Harness that allows you to run all 4 speed controllers from one battery. The power harness has a male Deans type power connector on one end, and a set of 4 3.5mm Male and Female bullet connectors at the other end. In addition to the bullet connectors, there is a male JST power connector for providing power to other items such as FPV gear or LED Nav lights.

Line Break - Medium Red

Next Level 500mm Quad, Standard Combo with Scorpion Motors
[NL-500QSPCS]
$529.99

This Next Level 500mm Quad Rotor Combo Kit is the standard power system featuring Scorpion SII-2212-960 motors that is designed for pilots that simply what to sport fly their Quad-Rotor craft and possibly hang a GoPro camera on it some time in the future. For pilots that want to also use FPV gear or other additional options, you should use select the 500 Quad High Power Combo Kit with Scorpion Motors that is also available on our site.

This Combo Kit contains all of the parts needed to assemble the 500mm Quad Rotor frame, except for the battery, receiver and Flight Controller Board, which need to be purchased separately.

Included in this Standard Power Combo Kit are the following items:

1 – Next Level 500mm Quad Rotor Frame Kit
4 – Scorpion SII-2212-960 Motors, 1070 Kv
4 – Next Level 20 Amp Speed Controllers
4 – Next Level 100mm Motor Lead Extension Kits
2 – GemFan 9×4.7 Green Multi-Rotor Props
2 – GemFan 9×4.7R Green Multi-Rotor Props
2 – GemFan 9×4.7 Black Multi-Rotor Props
2 – GemFan 9×4.7R Black Multi-Rotor Props
2 – Sets of 3.5mm Bullet Connectors

Also included in the Combo Kit is a 4-to-1 Power Harness that allows you to run all 4 speed controllers from one battery. The power harness has a male Deans type power connector on one end, and a set of 4 3.5mm Male and Female bullet connectors at the other end. In addition to the bullet connectors, there is a male JST power connector for providing power to other items such as FPV gear or LED Nav lights.

Line Break - Medium Red

Next Level 500mm Quad, Hi-Power Combo with Cobra Motors
[NL-500QHPCC]
$489.99

This Next Level 500mm Quad Rotor Combo Kit is the high power system featuring Cobra 2217/20 motors that is designed for pilots that what to sport fly their Quad-Rotor craft and have enough power to install a larger camera and FPV Gear. For pilots that simply want to sport fly their quad without adding FPV gear or other additional options, you should use select the 500 Quad Standard Power Combo Kit that is also available on our site.

This Combo Kit contains all of the parts needed to assemble the 500mm Quad Rotor frame, except for the battery, receiver and Flight Controller Board, which need to be purchased separately.

Included in this High Power Combo Kit are the following items:

1 – Next Level 500mm Quad Rotor Frame Kit
4 – Cobra 2217/20 Brushless Motors, 960 Kv
4 – Next Level 30 Amp Speed Controllers
4 – Next Level 100mm Motor Lead Extension Kits
2 – GemFan 10×4.5 Green Multi-Rotor Props
2 – GemFan 10×4.5R Green Multi-Rotor Props
2 – GemFan 10×4.5 Black Multi-Rotor Props
2 – GemFan 10×4.5R Black Multi-Rotor Props
2 – Sets of 3.5mm Bullet Connectors

With a 3-cell Li-Po battery pack, at 11.1 volts under load, the Cobra 2217/20 motor turning GemFan 10×4.5 props will product the folowing performance numbers at full throttle:

Amps – 14.6
Watts – 162
RPM – 7,180
Thrust – 941 grams, 33.2 ounces
Pitch Speed – 30.6 MPH

Four of these motors together will produce a total of 3764 grams or 132.8 ounces of combined thrust at full throttle. When assembled, this combo kit will weigh 40 ounces without a receiver or flight controller board. Depending on the flight controller board and receiver you use, the ready to fly weight with a 3-cell 3300mah battery pack will be in the 50 to 52 ounce range, and with a 3-cell 5000mah battery it will be in the 54 to 56 ounce range.

To maintain good maneuverability and performance, we recommend that the maximum flying weight of this setup should be no more than 60% of the total available thrust. For this power system, that would be 80 ounces maximum take-off weight.

Also included in the Combo Kit is a 4-to-1 Power Harness that allows you to run all 4 speed controllers from one battery. The power harness has a male Deans type power connector on one end, and a set of 4 3.5mm Male and Female bullet connectors at the other end. In addition to the bullet connectors, there is a male JST power connector for providing power to other items such as FPV gear or LED Nav lights.

Line Break - Medium Red

Next Level 500mm Quad, Standard Combo with Cobra Motors
[NL-500QSPCC]
$449.99

This Next Level 500mm Quad Rotor Combo Kit is the standard power system featuring Cobra 2213/26 motors that is designed for pilots that simply what to sport fly their Quad-Rotor craft and possibly hang a GoPro camera on it some time in the future. For pilots that want to also use FPV gear or other additional options, you should use select the 500 Quad High Power Combo Kit that is also available on our site.

This Combo Kit contains all of the parts needed to assemble the 500mm Quad Rotor frame, except for the battery, receiver and Flight Controller Board, which need to be purchased separately.

Included in this Standard Power Combo Kit are the following items:

1 – Next Level 500mm Quad Rotor Frame Kit
4 – Cobra 2213/26 Brushless Motors, 950 Kv
4 – Next Level 20 Amp Speed Controllers
4 – Next Level 100mm Motor Lead Extension Kits
2 – GemFan 9×4.7 Green Multi-Rotor Props
2 – GemFan 9×4.7R Green Multi-Rotor Props
2 – GemFan 9×4.7 Black Multi-Rotor Props
2 – GemFan 9×4.7R Black Multi-Rotor Props
2 – Sets of 3.5mm Bullet Connectors

Also included in the Combo Kit is a 4-to-1 Power Harness that allows you to run all 4 speed controllers from one battery. The power harness has a male Deans type power connector on one end, and a set of 4 3.5mm Male and Female bullet connectors at the other end. In addition to the bullet connectors, there is a male JST power connector for providing power to other items such as FPV gear or LED Nav lights.

Line Break - Medium Red

1-8 Cell Battery Meter & Low-Voltage Alarm
[NL-8C-LVA]
$9.99

The Next Level Battery Meter and Low-Voltage Alarm is a dual purpose device that works well on aircraft, helicopters and multi-rotor models alike. First, it is an 8-cell battery meter that will read the total pack voltage, as well as give you the individual cell voltages. Unlike many other meters available today, this one will actually read a single cell battery.

In addition to functioning as a battery meter, this product is also a Low-Voltage Alarm. The alarm feature can be manually set to anything from 2.70 volts, up to 3.80 volts per cell in 0.10 volt increments by use of a programming button on the top of the meter. When any of the cells in the pack discharges to the pre-set voltage level, the alarm beepers will start sounding and a high brightness red LED will start blinking to give the user both an audible warning and a visual warning that the battery has discharged to the set level.

This alarm feature is particularly useful in multi-rotor type models where you typically fly at a rather consistent power setting throughout the flight, and do not really notice the performance dropping of with the batteries until it might be too late.

Line Break - Medium Red

Next Level Shock Absorber
[NL-Shock1]
$8.99

The Next Level Shock Absorber Kit works great to smooth out the landings of your multi-rotor model, however, if you have one fall out of the sky from 20 feet up, you might hit hard enough to break one of the shocks. For cases like that, we offer single replacement parts for the Next Level Shock Absorber Kit. This shock absorber is an exact replacement for the ones that come in the Next Level Shock Absorber Kit for the 500mm and 650mm frames.

Source: Innov8tive Designs

Related posts:

  1. EXCLUSIVE: Introducing Next Level Multi-Rotors
  2. Next Level Multi-Rotors Test Flight
  3. New products for your Multi-Rotor project
  4. VIDEOS: Next Level Multi-Rotor 650 flight test
  5. PRODUCT ANNOUNCEMENT: Innov8tive Designs now carrying GemFan Wood Series Props
Advertisment

Subscribe to the post comments feeds or Leave a trackback