Note: Please check with your local hobby shop or favorite online retailer for availability and pricing. For those hobby shops or online retailers in the United States who would like to carry these or any other Align products please contact either of the following Align Distributors to place your order.

Assurance RC Distributor

Heli Wholesaler

6S1P 22.2V 5200mAh/50C/A HBP52003
[HBP52003]
$170.99

Specification:
●This Li-poly battery is using series/balancing design, features high efficient and high discharge, use a inspection machine to match packs, suitable for TREX 550 ~TREX 800 series.

●Max Continuous Discharge: 50C, Burst Discharge: 65C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.
●Recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

●Output:22.2V(6S1P)5200mAh 115Wh
●Dimension:142x60x44mm
●Weight:740g

NOTE:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can’t exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire.

Line Break - Medium Orange

Motor Pinion Helical Gear 11T H55G002XXW
[H55G002XXW]
$7.99

Instruction:
●Use for T-REX 550E.
●Brand new M1 motor helical pinion with Stainless steel material. This high strength and high rigidity characteristics can help to increase wear resistance and longevity.
●Must with CNC Slant Thread Main Drive Gear/112T(H60G001XXW).

Specification:
●Motor pinion gear 11T x 1
●M4 set screw x 2(M4x4mm)

Line Break - Medium Orange

Motor Pinion Helical Gear 10T H55G001XXW
[H55G001XXW]
$7.99

Instruction:
●Use for T-REX 550E.
●Brand new M1 motor helical pinion with Stainless steel material. This high strength and high rigidity characteristics can help to increase wear resistance and longevity.
●Must with CNC Slant Thread Main Drive Gear/112T(H60G001XXW).

Specification:
●Motor pinion gear 10T x 1
●M4 set screw x 2(M4x4mm)

Line Break - Medium Orange

Motor Slant Thread Pinion Gear 12T H70G006XXW
[H70G006XXW]
$8.99

Instruction:
●Use for T-REX 700E.
●Brand new M1 motor helical pinion with Stainless steel material. This high strength and high rigidity characteristics can help to increase wear resistance and longevity.
●Must with CNC Slant Thread Main Drive Gear/112T(H70G002XXW).

Specification:
●Motor Slant Thread pinion gear 12T x 1
●M4 set screw x 2(M4x4mm)

Line Break - Medium Orange

Motor Slant Thread Pinion Gear 13T H80G003XXW
[H80G003XXW]
$8.99

Instruction:
●Use for T-REX 800E/700E/600E PRO.
●Brand new M1 motor helical pinion with Stainless steel material. This high strength and high rigidity characteristics can help to increase wear resistance and longevity.
●800E Must with CNC Slant Thread Main Drive Gear/110T(H80G002XXW).
●700E Must with CNC Slant Thread Main Drive Gear/112T(H70G002XXW).
●600 PRO Must with CNC Slant Thread Main Drive Gear/112T(H60G001XXW).

Specification:
●Motor Slant Thread pinion gear 13T x 1
●M4 set screw x 2(M4x4mm)

Line Break - Medium Orange

Torque Tube Front Drive Gear Assembly H60T002XXW
[H60T002XXW]
$9.99

Instruction:
●Use for T-REX 550E/600/600 Nitro/600 PRO.

Specification:
●Front drive gear case x 1
●Socket button head self tapping screw x 2(T2x8mm)

Line Break - Medium Orange

700 Tail Rotor Hub H70T002XXW
[H70T002XXW]
$9.99

Instruction:
●Use for T-REX 700E/700N/800。
●Must with:
700 Tail Rotor (H70T001XXW)

Specification:
●700 tail rotor hub x 1
●Tail rotor washer(Φ8xΦ10×0.3mm) x 4
●washer(Φ3xΦ8x1mm) x 2
●M4 set screw x 2(M4x4mm)
●socket collar screw x 2(M3x8mm)
●Weight:27.19g

Line Break - Medium Orange

M1 Autorotation tail drive gear /104T HN7020BA
[HN7020BA]
$15.99

Instruction:
●Use for all 700N class machines.

Specification:
●104T M1 Autorotation tail drive gear x 1

Source: Align Taiwan webstore

Subscribe to the post comments feeds or Leave a trackback