Coming soon from ReadyHeli, Gryphon Electronics!

Ready will soon be carrying the full line of Gryphon Electronics.

Gryphon regulators are engineered from the ground up to provide the highest quality of performance available for RC models today. Incorporating both looks and performance, Gryphon gets the job done with style. Unlike competing regulators that are just strong enough for their task, Gryphon regulators are gratuitously over-sized for their applications, thus always proving to be a safe and reliable choice.

Gryphon Pin-Flag Switch

  • Optional part for GVR-7020 Gryphon Extreme-Heli Voltage Regulator.
  • The Pin-Flag switch is a fail-safe-on type switch. If the switch is destroyed, the unit will remain ON. Only when the pin is inserted into the switch does the unit turn OFF.
  • Bight Blue LED activates when the switch is in the ON position.

Gryphon Duo 2-channel Voltage Regulator

If you’re running unregulated LiPo or LiFe power to your servos, this regulator will allow you to run regulated current to your sensitive Gyro and Tail servo. Integrated heatsink allows for superior cooling. Specs: – Input Voltage: 6V to 10V (5-8 cell NiCd/NiMH or 2-cell LiFe/LiPo) – Output Voltage: 5.2V or 6.0V, User Selectable – Max Continuous Current: 3A @ 6.0V – Max Peak Current: 10A @ 6.0V for 30sec – Ports: Input 2CH, Output 2CH – Size: 10mm x 23mm x 40mm (HxWxL) – Weight: 9g Includes main unit and 2 patch-cables.

Gryphon Extreme-Heli Voltage Regulator-Available in Silver or Black
Silver version with Hyper White LED’s, Black version with royal purple LED’s

The Gryphon Extreme-Heli regulator is a dual linear regulator consisting of hybrid components with a very strong power supply bus. The Gryphon is a high-end regulator designed to easily handle the heaviest 3D or F3C/FAI flying in the most brutal conditions.

The Gryphon regulator is designed for the most demanding applications. The massive integrated heatsink allows the user to mount it in areas with very low airflow without consequence. The power bus feature distributes power uniformly among all servo channels while also providing complete noise filtering between each channel. Thoroughly tested and proven, this regulator is not only able to compete with the very BEST regulators out there, it completely dominates. The icing on the cake is that it just happens to look real good doing its job ;]

– Input voltage: 6 to 10 Volts (5-8 cell NiCd/NiMH or 2cell LiFe/LiPo)
– Output voltage:
— Servo Channel: 5.2V, 6.0V, 6.8V, 7.4V, 8.4V (Unregulated)
— RX channel: 5A (Max 10A)
– Output current:
— Servo Channel: 10A (Max 15A @ 6.0V)
— RX Channel: 5A (Max 10A)
– Low Voltage Alarm Setup: LiFe type (6.5V), LiPo type (7.3V), User selectable.
– Switch Type: Fail save (Fail-Safe-On) Pin-Flag contact-less type
– Power Connector Type: Deans
– Size: 17mm x 40mm x 64mm (HxWxL)
– Weight: 45g (excluding cables)

Output voltage is user selectable from 5.2V, 6.0V, 6.8V, 7.4V, up to 8.4V unregulated. These options are selectable using four-stage DIP switch on the bottom of the unit.

Low Voltage alarm circuit is integrated into the unit. It is user selectable on/off for safety and convenience. According to the type of battery, alarm voltage can be established (LiFe or LiPo).

Gryphon Auto Booster Remote Operated Glow Igniter
The Gryphon Auto Booster is a remote operated glow ignition device. Sleek design encased in a durable plastic shell, the Auto Booster tends to make a nice addition to any Nitro helicopter, airplane car, or even boat for easy glow plug ignition.

– Operating Voltage: 4.8V to 7.4V, User Selectable
– Idle Current Drain: 20mA
– Working Current Drain: 650mA
– Size: 10mm x 40mm x 23mm (HxWxL)
– Weight: 20g With Cables

– Glow plug can be remotely ignited with a transmitter by using a receiver channel (Gear, AUX, etc)
– The glow ignition operation can increase engine power rapidly during hard 3D flight if activated.
– A total of 5 steps of glow plug heat intensity are possible & selectable.
– The automatic fuse circuit protects the receiver from excessive current drain in the event of a short or abnormal over-current.
– The Plug ignition can be confirmed through LED and buzzer sound. If the plug is bad, the LED and/or buzzer will not activate.
– The plug can be automatically ignited by the flip of a switch on your transmitter.
– Equipped with an output terminal for an optional high-output external buzzer. Useful in the event that your heli crashes and you can’t find it, just flip on the glow igniter and it will start buzzing very loud.

Includes Alligator clip for connection to glow plug and a lead for connecting the negative to your motor housing. Also includes a patchcable for interface between Auto Booster and your Receiver.

Gryphon External Buzzer

  • This optional accessory for the Gryphon Auto Booster plugs into the AUX port for additional very loud buzzing when Auto Booster is activated.
  • Useful as a locator tool. If you lose your model, turn on the Auto Booster with this loud buzzer and it will be easy to find!

Gryphon Low Voltage Display LED Board

  • Optional part for GVR-7020 Gryphon Extreme-Heli Voltage Regulator. Plugs into the AUX position on the regulator.
  • Red LED’s illuminate when a low-voltage condition is met. Low-voltage condition is user-selectable for LiFe or LiPo at the Voltage Regulator.

Gryphon slide switch

  • Optional part for GVR-7020 Gryphon Extreme-Heli Voltage Regulator.
  • The slide switch is a fail-safe-on type switch. If the switch is destroyed, the unit will remain ON. Only when the sliding switch is moved to the OFF position will the unit turn OFF.
  • Bight Blue LED activates when the switch is in the ON position.


Subscribe to the post comments feeds or Leave a trackback