Check out E-Flites new Blade 450 3D! Read on for more photos, specifications and information.
aaaaaaaaa

From E-Flite:

The Blade 450 3D gives intermediate to advanced heli pilots an outdoor ready-to-fly experience like no other. It comes out of the box equipped with state-of-the-art features like brushless power, digital servos, a heading lock gyro, CCPM control and symmetrical blades. Its new and improved cyclic and tail servo provides crisper, cleaner response for added precision and stability while the new heading lock gyro that provides more control over the tail for additional control and confidence. The 450′s aggressive new body and trim scheme make this Blade is one hot heli. And because it’s flight tested at the factory, no pre-flight setup is required.

Like its predecessor, the RTF version of the Blade 450 comes equipped with Spektrum’s advanced DX6i 2.4GHz DSMX 6-channel programmable aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i’s DSMX technology offers other unique advantages like faster control response and innovative features such as ServoSync. ServoSync automatically re-sequences transmitted data so mixed servos receive their pulses at the same time so you can fly 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6115e Microlite receiver.

The Blade 450 is ready for everything from smooth hovering to 3D aerobatic flying and blasts ready-to-fly 3D heli performance to new levels of precision and power. It comes completely assembled and equipped for aggressive 3D aerobatics with state-of-the art electronics and mechanics you would expect to find in more expensive kits that take hours to build. It’s even been flight-tested and had the rotors balanced at the factory so you don’t have to do any setup. Simply charge its 3S 2200mAh 30C LiPo battery and fly.

Specifications
Length: 655mm (25.8 in)
Rotor diameter: 720mm (28.4 in)
Height: 235mm (9.3 in)
Tail rotor diameter: 142mm (5.6 in)
Weight: 760g (26.9 oz)
Motor: E-flite 420H brushless outrunner, 3800Kv (installed)
Speed Controller: E-flite 35A Pro S-BEC Brushless (installed)
Receiver: Spektrum AR6115e DSMX™ Microlite Receiver (installed)
Swash Servos: E-flite DS76 Digital Sub-Micro (3) (installed)
Tail Servo: E-flite DS76T Digital Sub-Micro (installed)
Gyro: E-flite G210 Micro Heading Lock MEMS (installed)

Source: Horizon Hobby UK

Related posts:

  1. NEW:Eflite Blade CX3
  2. NEW: E-Flite Blade SR RTR
  3. mSR X RTF by BLADE
  4. Blade 450 X BNF by BLADE
  5. NEW: Blade Helis Introduces The Blade 500 3D RTF & BNF
Advertisment

Subscribe to the post comments feeds or Leave a trackback