CellLog 8S Cell Voltage Monitoring & Recording is a new product on the market if you are crazy about battery performance on your larger RC Helicopters. This device can handle up to an 8S pack. And for $34.99 you can’t beat the value.
- Accurate cell voltage monitoring and measurement to three decimal places
- Small size with many functions, backlight 128×64 LCD and tone alarm
- Simple, easy to use interface
- Measures 2-8S Li battery individual voltage and can also measure NiMH, NiCd, and Pb battery pack voltage
- Settings include Individual Voltage Alarm or Pack Voltage Alarm, Overvoltage Alarm, Low voltage Alarm, Differential Voltage
- Alarm, and Time Over Alarm
- An extra alarm output is integrated which can be controlled by the user
- LiPo/LiIo/LiFe battery types voltage monitor mode can be selected separately
- CellLog 8S has been 100% calibrated and also supports user calibration
- CellLog 8S has a 16Mbit flash storage, which can log offline charge and discharge data for 36 hours
- Firmware can be updated as new features are added and improved by the USB port. The CellLog 8S also support the “logview” software and can display, plot and analyze the charge and discharge data by it.
Specifications
- Lithium (LiPo/LiIo/LiFe) battery cell count: 2–8 series
- Pack voltage range: 4.0–43.0 V DC (with USB to 1.0V)
- Alarm pack voltage range: 0.1–4.3 V DC
- Cell voltage range: 1.3–4.9 V DC
- Alarm cell voltage range: 1.3–4.9VDC
- Voltage display resolution: 1mV
- Voltage display resolution: 5mV
- Current loading of test: 8mA
- Maximum voltage for alarm port: 50VDC
- Current drain for alarm port: <500mA
- Log Files storage: 16Mbit (36 hours)
- PC Connect: USB port
- Weight: 18 g
- Dimensions (LxWxD): 62x39x12 mm [2.44”X1.53”X0.47”]
Source: http://www.progressiverc.com
Be The First To Comment
Related Post
Please Leave Your Comments Below