Bantam has just released a new, versatile charger, the BC6DX-II…


–  Included Connection Balance Board

The BC6DX-II includes the 2S through 6S balance board for JST-XH balance taps. Optional balance taps include EAC129 for Thunderpower / Flight Power, EAC123 for Hyperion / Polyquest, and EAC128 for Kokam / Graupner. See our Balance Tap Configuration Guide if you are not sure what balance board you need.

–  Dual input power

BC6DX-II employs a circuit that can be operated at AC (Alternating Current) or DC (Direct Current) input power. On AC power the charger’s maximum output power is 50W charging. With DC power input, the charger’s maximum output power is 90W. As a result, it can charge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries. There may be the limit of feeding current to a higher voltage battery. Please refer ‘Maximum circuit power chart’.

–  Individual voltage balancer for Lithium batteries buit in

The BC6DX-II has an individual-cell-voltage balancer built in. So it does not need an external balancer  when charging Lithium batteries (LiIo/LiPo/LiFe) for cell balancing.

– Balance individual cells on discharge

The BC6DX-II also can monitor and balance individual cells on Lithium batteries during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with an error message.

–  Accept various types of Lithium chemistries

The BC6DX-II can accept three types of Lithium batteries – LiIo, LiPo and LiFe. They have different characteristics by their chemistry.

– Lithium battery ‘Fast’ and ‘Storage’ mode

‘Fast’ charge reduces the charging time of Lithium batteries and ‘Storage mode controls the final voltage of the battery for long time storage.

–  Data store/load

Up to 10 data memories.   Each memory can be recalled at any time you need without reprogramming.

–  Cyclic charging/discharging

Perform 1 to 10 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

–  PC based analysis using USB communication

BC6DX-II offers PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack. The firmware can be upgraded from internet download, when the newer version is released.   Optional part # EAC400 is required.

– Robust outer aluminum case & Cooling Fan

High-quality aluminum case is durable and very efficient to cool out the internal heat as well as built in cooling fan.

Manual Download available in PDF – Click Here!

Source: RC Accessory

Subscribe to the post comments feeds or Leave a trackback