I was on the Century RC Helicopter Products website looking for some 550mm wood main blades for a 30 size heli I got as a gift, when I came across this info. Century RC Helicopter Products just added the Radikal G30 on their website and two teaser videos. Click on to get the details, see some pre-production pics, and to watch the videos.
Century continues to dominate the gas powered heli market with the addition of this new line.
There were three versions added:
Radikal G30 (part #CN1340)
Radikal G30 Carbon (part #CN1340C)
Radikal G30 SE Carbon (part #CN1340CE)
Radikal G30 (part #CN1340)
MSRP $650.00
Features:
- Semi-metal rotor head with two types of hard dampeners. (for 690-710mm Main blades) For 3D maneuver.
- Aluminum triple bearing metal swash plate with zero-slop bearing design.
- Black modular G-10 side frames with aluminum ridge frame enforcements provides vibration dampening and a multi-point supported solid frame design.
- Designed for light weight, super rigidity, easily build process, and low maintenance.
- Top quality ball bearings, thrust bearings and one way bearing.
- Aluminum bearing blocks with double upper main shaft bearing and extra thrust bearing.
- Heavy Duty double bearing supported and double NSK One-way bearing autorotation design with extra large aluminum lower bearing support to provide no power lose and increased life.
- Advanced 4-point supported engine mounts for less vibration and highest rigidity.
- Adjustable gear ratios available: 6.0, 6.42 and 6.92.
- Designed to be powered by Zenoah G231, G26 or after market G27 and G30 modified gasoline engines. This side frame design accepts up to 4 BHP power output.
- Extra large clutch and clutch bell with Heavy Duty one way starter design to provide 100% power transfer.
- Advanced intake/exhaust cooling fan system and specially designed fan cover for maximum efficiency to cool the engine.
- Machined POM Main Gear and DuPont™ plastic parts.
- Automotive grade tail drive belt supported by aluminum timing pulley and idler pulley along with double bearing supported aluminum tail bearing coupler.
- Carbon adjustable tail pitch control rod.
- High Gloss white fiberglass painted canopy (Black windshield and white body).
- Heavy duty landing gear.
Specifications:
- Length: 55 inch / 1397 mm
- Height: 17 inch / 432mm
- Main Rotor Diameter: 62.2 inch / 1580 mm (with optional RotorTech™ 710mm)
- Tail rotor diameters: 11.1 inch / 282.5 mm (with optional RotorTech™ 105mm)
- Engine: Zenoah™ Z-231, 26 or Modified Z-27 and Z-30 gasoline engine.
- Start method: Top Hex start or Optional pull start.
- Dry Weight: approximately 5 kg / 11 lbs. when full load tested with 5 Futaba digital servos, Futaba 611 Gyro, Futaba 2.4G receiver, Li-Po Receiver battery and Century 3D Torpedo Slim Muffler.
Just Provide ( Items required to fly but not included ):
- 1x 690mm-710mm Main Blades.
- 1x 6-Channel or better Radio Transmitter system capable of 120 degree eCCPM mixing.
(7 Channels or better recommended, for governor)
- 1x 6-Channel or better Receiver and Receiver Battery.
(7 Channels or better recommended, for governor)
- 1x Zenoah Z-231, 26 or Modified Z-27 and Z-30 gasoline engine.
- 1x Muffler.
- 5x Sport line or better Servos.
- 1x Gyro. (Heading Lock/Hold recommended)
- 1x Governor (optional but recommended)
- 1x Crystal Set. (if using non-2.4GHz radio sytem)
- 1x 87 to 92 Octane Gasoline.
- 1x 2-Stroke Motor Oil.
- 1x Synthetic Oil/Grease.
- 1x Pull Start System or Starting Equipment.
- 1x RC Helicopter Tools.
Radikal G30 Carbon (part #CN1340C)
MSRP $750.00
Features:
- Light weight fully carbon fiber side-frames, tail fins with rigid aluminum frame enforcements.
- Metal center hub along with two different hard dampeners. For hot 3D maneuvers.
- Aluminum tail gear box.
- Carbon tail boom supports with aluminum ends.
- Aluminum fly bar control arm set.
- Aluminum seesaw control arms.
Specifications: Same as the G30
Just Provide ( Items required to fly but not included ): Same as the G30
Radikal G30 SE Carbon (part #CN1340CE)
MSRP $850.00
Features:
- New Aluminum Metal Rotor head, mixing arms and metal blade grips.
- New Aluminum Fly bar seesaw holder.
- New aluminum seesaw assembly.
Specifications: Same as the G30
Just Provide ( Items required to fly but not included ): Same as the G30
Here are the videos:
Source: Century RC Helicopter Products
Be The First To Comment
Related Post
Please Leave Your Comments Below