HOT Upgrades for the new Align T-Rex 700 Nitro

Dear Folks,

The Align has already released the much-awaited Trex-700 Nitro and if you possess one or are planning to get one for yourself and also if you looking forward to boost the performance of this beast even further, Please read on and I will update you about the hottest upgrades available for this cool helicopter.

Let’s start with the blade grips. QUICK UK offers blade grips TX7H-081 and flybar control arms TX7H-031. The prices are £3.94 and £6.94 respectively. These products are the best you can get for your Trex 700!

Plus, there is a complete set to upgrade the default links and control arms that come along with the kit for extreme 3D flying, the package price is £ 29.75, which in my opinion is fairly low for the quality it has. This kit can be used to replace the original control balls and joints with high strength Delrin moulded links and stainless steel control balls, main blade pitch balls and flybar control arms.

Quick UK has also recently introduced TREX 600/700 Push-Pull Servo Wheel Set - HITEC.Further information at http://www.quickuk.eu/products/741/trex_600_700_push-pull_servo_wheel_set_-_hitec.html

In case you are planning to convert your Nitro helicopter into an electric one, You can consider installing NEU 1912 H/1Y motors along with an adapter plate, making sure that the motor pinion teeth engage properly with the stock main gear, then using the 8S batteries and then running two ESC’s off a Y connector.  I think it would help achieve extreme 3D with flight times of around 4 minutes, if you want to boost the flight times even further consider upgrading the battery packs to 10/12S and higher MAH ratings.

I hope this post was of help to you, Your feedback and comments are highly appreciated and welcome.

Thanks and have a great day ahead!