Hirobo Unveils Dedicated Embla 450E Page

Have you been wondering about the new Hirobo Embla 450E? Maybe you have been looking for more information about the Hirobo Embla 450E? Well, I am glad to announce that Hirobo has unveiled a dedicated Embla 450E page. Hirobo included information for all versions of the Embla 450E, detailed descriptions of features, and much more.

Nice job Team Hirobo to bring more information to your followers and potential followers. Continue through to check out even more detail for the Embla 450E.

The most aggressive 3D machine ever NEW MODEL DEBUT
Embla 450E

Embla has two faces, In one side, it is a perfect partner as first time outdoor model after indoor models. On the other side, Embla is also a perfect partner for experienced pilots who needs a machine capable of handling most aggressive 3D flights you can imagine with 450 models. Stabilizer(SZM2) and Stabilizer less (SLM) models are available.

SZM-II Rotor Head – A proven setup system

Feature
1. SZM-II Rotor Head
This rotor head is inheriting D3 / SDX design. Mixing arms are attached on blade holders. Just as previous models, wide range of different setting possible with using different setting holes. Maximum pitch range is 26-28°（+/- 13 to 14).

2. Cabin
Painted cabin included.

3. Swashplate
All metal 120°SWM swashplate included.

4. Main frame
Carbon main frame is used. The main frame layout is Hirobo original design for maximum 3D performance.

5. Linkage
120°SWM linkage. 2 servos are direct/single linkage. 3rd servo is push pull linkage with levers.

6. Skid
One piece plastic skid included. Skid rubber also included.

7. Belt drive
Belt drive design is as durable and trustable as any other Hirobo models. The belt from Japanese manufacturer is used.

8. Tail unit / Vertical fin
Tail rotor hub is made of aluminum and stainless steel for more strength.Carbon vertical fin included.

9. Horizontal fin
Carbon horizontal fin included.

10. Main blade
325mm carbon symmetrical main blade included. These blades are for both stabilizer and stabilizer less rotor heads. For safety, piano wire is added to prevent weights flying away in case of crash. Black carbon base color with white line.

Technical Specification
・ Length 657mm
・ Width 128mm
・ Height 220mm(SZM2 models)

・Main Rotor Dia 725mm
・Tail Rotor Dia 153mm
・Gear Ratio 1:12.5:4.4
・Weight approx 900g

Lineup
0304-904
EMBLA 450E SZM2 (Stabilizer) kit with motor / ESC
0304-906
EMBLA 450E SZM2 (Stabilizer) kit without motor / ESC

Accessories
・Motor
0304-100 EB blushless motor
29/10T/3700
※Not included in kits w/o ESC/motor.

・ESC
0304-101 EB ESC40A BEC
※Not included in kits w/o ESC/motor.

・Main blade
0304-106 EB carbon main blade
L=325 symmetry

Sold Separately
・Lipo battery
3cell 1pack 11.1V2,100～2,500mAh
Maximum size 100×35×25mm

・Electronics
Transmitter for helicopters, Receiver,
3servos + Rudder servo

・Gyro
SZM2 rotor head :Rudder gyro

Feature
1. SLM Rotor Head
All setup is controlled from 3 axis gyro. Due to stabilizer less design, there is less power loss. It gives enough power for 3D even with stock motor. Maximum pitch range is 32°(+/- 16°). 3 Axis gyro required

2. Cabin
Painted cabin included.

3. Swashplate
All metal 120°SWM swashplate included.

4. Main frame
Carbon main frame is used. The main frame layout is Hirobo original design for maximum 3D performance.

5. Linkage
120°SWM linkage. 2 servos are direct/single linkage. 3rd servo is push pull linkage with levers.

6. Skid
One piece plastic skid included. Skid rubber also included.

7. Belt drive
Belt drive design is as durable and trustable as any other Hirobo models. The belt from Japanese manufacturer is used.

8. Tail unit / Vertical fin
Tail rotor hub is made of aluminum and stainless steel for more strength.Carbon vertical fin included.

9. Horizontal fin
Carbon horizontal fin included.

10. Main blade
325mm carbon symmetrical main blade included. These blades are for both stabilizer and stabilizer less rotor heads. For safety, piano wire is added to prevent weights flying away in case of crash. Black carbon base color with white line.

Technical Specification
・ Length 657mm
・ Width 128mm
・ Height 198mm(SLM models)

・Main Rotor Dia 725mm
・Tail Rotor Dia 153mm
・Gear Ratio 1:12.5:4.4
・Weight approx 880g

Lineup
0304-905
EMBLA 450E SLM (Stabilizer less) kit with motor / ESC
0304-907
EMBLA 450E SLM2 (Stabilizer less) kit without motor / ESC

Accessories
・Motor
0304-100 EB blushless motor
29/10T/3700
※Not included in kits w/o ESC/motor.

・ESC
0304-101 EB ESC40A BEC
※Not included in kits w/o ESC/motor.

・Main blade
0304-106 EB carbon main blade
L=325 symmetry

Sold Separately
・Lipo battery
3cell 1pack 11.1V2,100～2,500mAh
Maximum size 100×35×25mm

・Electronics
Transmitter for helicopter, Receiver,
3servos + Rudder servo

・Gyro
SLM rotor head :3axis gyro
(aileron elevator rudder)

Option parts for Embla450E

Size Comparison

Click HERE to read what the pilots have to say.

Click HERE to read the FAQ.

Click HERE to view the vids.

Source: Hirobo Limited

Advertisment

Subscribe to the post comments feeds or Leave a trackback