Futaba S9352HV High Voltage High Torque/Speed Servo

Stock Number FUTM0720
Manufacturer Number S9352HV

Notes from the Tech Department

This is the S9352HV High Torque/High Speed Digital Servo from Futaba.

FEATURES: Designed to be used with models requiring especially high torque and high speed
One year limited warranty through Hobby Services beginning at date of purchase

INCLUDES: Futaba S9352HV Servo with 1.7″ (42.3mm) 3-Point Horn, 3x8mm Horn Screw, four Eyelets, two Rubber Grommets and Instruction Sheet

REQUIRES: Power supply of 6.0 – 7.4V

SPECS: 6.6V 7.4V
Speed: 0.07 sec/60° 0.06 sec/60°
Torque: 272.2oz/in (19.6kg/cm) 305.6oz/in (22kg/cm)
Size: 1.59 x 0.83 x 1.47″ (40.5 x 21 x 37.4mm)
Weight: 2.54oz (72g)

COMMENTS: Must be used with 2.4GHz radio systems for full performance
Line Break - Medium Orange
Futaba S9353HV HV High Torque/Speed Servo Metal Top Case

Stock Number FUTM0721
Manufacturer Number S9353HV


Line Break - Medium Orange
Futaba BLS256HV High Voltage High Speed Servo

Stock Number FUTM0759
Manufacturer Number BLS256HV

Notes from the Tech Department
This is the Futaba BLS256HV High Voltage High Speed Digital Heli Rudder Servo.

FEATURES:
Designed for rudder control in Futaba high end gyros Brushless motor
Handles up to 2S LiPo battery power
One year limited warranty through Hobby Services beginning at date of purchase

INCLUDES:
Futaba BLS256HV Servo
0.83″ (21mm) Diameter Round Horn
1.8″ (45mm) Diameter Round Horn
1.6″ (38.5mm) Diameter 4-Point Horn
1.2″ (32mm) Diameter 6-Point horn
Mounting Hardware

REQUIRES:
Installing in heli, connecting linkage and connecting to gyro

SPECS:
Speed: 0.055 sec/60° at 6.6V, 0.050 sec/60° at 7.4V
Torque: 61.1 oz/in (4.4 kg/cm) at 6.6V, 69.5 oz/in (5.0 kg/cm) at 7.4V
Size: 1.57 x 0.79 x 1.45″ (40 x 20 x 36.8mm)
Weight: 2.15oz (61g)
Power Supply: 6.0 – 7.4V DC

COMMENTS:
The BLS256HV is designed only for gyro rudder control. Dead band is set as narrowly as possible. When the fuselage is static, the servo may jitter. This condition is normal.
Very high current drain is normal at startup. Always use a 6V – 7.4V battery.

Source: Futaba

Related posts:

  1. Website Updated with Info Added for New Products
  2. PRODUCT INFO: Futaba Adds Details For New Brushless Servos
  3. Need some high voltage servos . . . . check out this information
  4. PRODUCT INFO: New Futaba S.Bus High Voltage Servos
  5. PRODUCT INFO: Futaba HV S.Bus Servos added
Advertisment

Subscribe to the post comments feeds or Leave a trackback