NEW: Flymentor 3D!

A new electronic stabilization system is now available from RC Aerodyne!

This system has multiple applications from stabilizing your aerial photography platform to acting as an electronic insurance policy when you’re trying out some crazy 3D or flying that high-roller scale turbine machine!

Features:

A new type of sensing process provides reliable geographical positioning, completely independent of the visible horizon.

The built-in CCD sensor can catch the ground picture to compare, and prevent the helicopter from drifting. You can adjust the working status of Flymentor by using an AUX Channel. A awitchable gain system offers three different positions: Off, Stabilisation and Position-holding mode.

It also includes programming for heading lock gyro outside setting and Swashplate mixer. You can control the sensitivity and mode of gyro by a GEAR/AUX Channel.

The electronics support helicopters with 3-Servo 120-degree swashplate, or 3-Servo 140-degree swashplate, or 4-Servo 90-degree swashplate and 4-Servo 90-degree+45-degree swash plate.

The system also compensates for attitude stabilisation in inverted flight.

You can program the Flymentor by computer USB adapter.

If you use FM/PPM radio equipment, Flymentor will make the aileron, elevator and tail servo back immediately as a failsafe. The pitch will remain in the final signal position. And Flymentor will switch to position mode automatically. The sensitivity is 70%.

These are available now at RC Aerodyne’s website.

Advertisment

Subscribe to the post comments feeds or Leave a trackback