ProTek R/C 230S Digital Ultra Hi-Speed Helicopter Tail Servo
[PTK-230S]
$99.99

This is the ProTek R/C 230S Digital Ultra Hi-Speed Helicopter Tail Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo’s that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.

The ProTek R/C 230S Tail servo delivers lightning fast 0.04 transit speed and 102 oz-in of torque. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency.

Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum clamping style double arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don’t look back.

NOTE: This servo is not recommended for use with receiver/voltage regulator combo’s. We highly recommend you use the ProTek R/C Dual Power Bus Advanced Linear Voltage Regulator, or similar regulator to avoid potential brown out conditions.

Click Here For Warranty Information

Features:
● Aluminum middle case
● 0.04 transit speed, and 102 oz-in of torque @ 6.0V
● 1520μs / 333hz working frequency
● Aluminum clamping dual arm servo horn
● Full metal gears and dual ball bearings
● long 22awg connector wire w/gold plated connectors
● motor

Specifications:
● Operating Voltage: 4.8V – 6.0V
● Operating Temperature Range: 14° to 140° F (-10 to +60° C)
● Speed: @6.0V: 0.04 sec
● Torque: @ 6.0V: 102 oz-in (7.4 kg-cm)
● Motor Type: High Efficiency Coreless Motor
● Pulse/Frequency: 1520μs / 333hz
● Output Shaft: 25 Tooth
● Weight: 62g
● Gears: Metal

Line Break - Medium Green

ProTek R/C 230T Digital Ultra Hi-Torque Metal Gear Cyclic Servo (High Voltage)
[PTK-230T]
$99.99

This is the ProTek R/C 230T Digital Ultra Hi-Torque Metal Gear High Voltage Cyclic Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo’s that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.

The ProTek R/C 230T High Voltage Cyclic servo delivers an incredible 212 oz-in of torque with a 0.10 transit speed at 6.0V, but when you bump the voltage to 7.4 the specs increase to 262 oz-in and 0.08! Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency.

Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum clamping style double arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don’t look back.

NOTE: This servo is not recommended for use with receiver/voltage regulator combo’s. We highly recommend you use the ProTek R/C Dual Power Bus Advanced Linear Voltage Regulator, or similar regulator to avoid potential brown out conditions.

Click Here For Warranty Information

Features:
● Aluminum middle case
● High voltage circuitry
● 0.10 transit speed, and 212 oz-in of torque @ 6.0V
● 0.08 transit speed, and 262 oz-in of torque @ 7.4V
● 1520μs / 333hz working frequency
● Aluminum clamping dual arm servo horn
● Full metal gears and dual ball bearings
● 200mm long 22awg connector wire w/gold plated connectors
● Coreless motor

Specifications:
● Operating Voltage: 4.8V – 7.4V
● Operating Temperature Range: 14° to 140° F (-10 to +60° C)
● Speed: @ 6.0V: 0.10 sec, @ 7.4V: 0.08 sec
● Torque: @ 6.0V: 212 oz-in (15.3 kg-cm), @ 7.4V: 262 oz-in (18.9 kg-cm)
● Motor Type: High Efficiency Coreless Motor
● Pulse/Frequency: 1520μs / 333hz
● Output Shaft: 25 Tooth
● Weight: 62.5g
● Gears: Metal

Line Break - Medium Green

ProTek R/C 250T Digital Ultra Hi-Torque Metal Gear Cyclic Servo (High Voltage)
[PTK-250T]
$129.99

This is the ProTek R/C 250T Digital Ultra Hi-Torque Metal Gear High Voltage Cyclic Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo’s that will exceed your expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.

The ProTek R/C 250T High Voltage Cyclic servo delivers an incredible 212 oz-in of torque and 0.09 transit speed at 6.0V, and when you bump the voltage to 7.4 the specs increase to 262 oz-in and 0.07! Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, and a coreless motor.

Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum clamping style double arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don’t look back.

NOTE: This servo is not recommended for use with receiver/voltage regulator combo’s. We highly recommend you use the ProTek R/C Dual Power Bus Advanced Linear Voltage Regulator, or similar regulator to avoid potential brown out conditions.

Click Here For Warranty Information

Features:
● Full aluminum case
● High voltage circuitry
● 0.09 transit speed, and 212 oz-in of torque @ 6.0V
● 0.07 transit speed, and 262 oz-in of torque @ 7.4V
● 1520μs / 333hz working frequency
● Aluminum clamping dual arm servo horn
● Full metal gears and dual ball bearings
● 200mm long 22awg connector wire w/gold plated connectors
● Coreless motor

Specifications:
● Operating Voltage: 4.8V – 7.4V
● Operating Temperature Range: 14° to 140° F (-10 to +60° C)
● Speed: @ 6.0V: 0.09 sec, @ 7.4V: 0.07 sec
● Torque: @ 6.0V: 212 oz-in (15.3 kg-cm), @ 7.4V: 262 oz-in (18.9 kg-cm)
● Motor Type: High Efficiency Coreless Motor
● Pulse/Frequency: 1520μs / 333hz
● Output Shaft: 25 Tooth
● Weight: 72.5g
● Gears: Metal

Line Break - Medium Green

ProTek R/C 250S Digital Ultra Hi-Speed Helicopter Tail Servo
[PTK-250S]
$129.99

This is the ProTek R/C 250S Digital Ultra Hi-Speed Helicopter Tail Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo’s that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.

The ProTek R/C 250S Tail servo delivers lightning fast 0.04 transit speed and 102 oz-in of torque at 6.0V. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, and a coreless motor.

Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum clamping style double arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don’t look back.

NOTE: This servo is not recommended for use with receiver/voltage regulator combo’s. We highly recommend you use the ProTek R/C Dual Power Bus Advanced Linear Voltage Regulator, or similar regulator to avoid potential brown out conditions.

Click Here For Warranty Information

Features:
● Full aluminum case
● 0.04 transit speed, and 102 oz-in of torque @ 6.0V
● 1520μs / 333hz working frequency
● Aluminum clamping dual arm servo horn
● Full metal gears and dual ball bearings
● 200mm long 22awg connector wire w/gold plated connectors
● Coreless motor

Specifications:
● Operating Voltage: 4.8V – 6.0V
● Operating Temperature Range: 14° to 140° F (-10 to +60° C)
● Speed: @ 6.0V: 0.04 sec
● Torque: @ 6.0V: 102 oz-in (7.4 kg-cm)
● Motor Type: High Efficiency Coreless Motor
● Pulse/Frequency: 1520μs / 333hz
● Output Shaft: 25 Tooth
● Weight: 71.8g
● Gears: Metal

Source: A Main Hobbies

Related posts:

  1. NEW: JR DS8917HV HV Servos Combo Pack
  2. PRESS RELEASE: Introducing the ProTek R/C Dual Power Bus Advanced Linear Voltage Regulator
  3. VIDEO: Introducing the the new ProTek R/C Cyclic Servos
  4. RJX Releases High Voltage Servos!
  5. RELEASE: ProTek R/C “Team Edition” Servos Have New Look & Incredible Specs
Advertisment

Subscribe to the post comments feeds or Leave a trackback