Click “View with PicLens” to read info for each detail pic.

[View with PicLens]

Instructions:
Preface:
● T-Rex 450 Pro V2 is a newly revised flybared helicopter model. The first sight of T-Rex 450 PRO V2 will surely leave a lasting impression of its attractive designs. The aerodynamic canopy is the most noticeable feature of T-Rex 450 PRO V2. The rotor head is precision made with CNC aluminum alloy for higher mechanical rigidity, contributing to optimal flight stability and aerobatic agility.
● Custom designed side frame allows for ease of electronics install and wire routing, while improving exterior aesthetics at the same time. Utilizes Align’s latest 450MX motor with built in cooling fan, effectively reducing heat while improving power output.
● 450 size is the most ideal practice heli for beginners and seasoned pilots alike. With beautiful aesthetics and superior performance, the T-Rex 450 Pro V2 is your obvious choice.

Features:
● The rotor head is precision made with CNC aluminum alloy for higher mechanical rigidity. With the highly precise metal washout control arm and best mixing radio, it is contributing to optimal flight stability and aerobatic agility.
● Improved side frame design resulting in clean wire management and improved aesthetics.
● Unibody main shaft and servo mount, with modified side frame connecting points, simplifying servo replacement and improving ease of maintenance.
● Brand new MX series high efficiency brushless motor, with heat sink style casing and built in cooling fan, effectively increase heat dissipation during operation, improving power output.
● Integrated battery / ESC mount, allowing adjustment based on battery dimension for optimal CG of the helicopter. Additionally the number of screws has been reduced to minimize assembly and maintenance time.
● Flexible electronic mounting locations achieved with swashplate anti-rotation guide designed to integrate with gyro mount, as well as inner frame carbon mounting plates.
● High efficiency tail shaft drive design, dramatically reduce power loss associated with belt driven system, and at the same time increase power output.
● Unique opposing weighted tail blade grips effectively increase rudder and gyro performance, for superior tail locking and higher precision.
● Vertical rudder servo mount design moving the CG closer to center, improving agility during 3D maneuvers.
● New aerodynamic canopy with paint scheme resembling the T-Rex 600E Pro, perfectly matched to the helicopter frame to create aesthetic perfection.

Specification:
● Length: 640mm
● Height: 230mm
● Main Rotor Diameter: 710mm
● Tail Rotor Diameter: 158mm
● Motor Drive Gear: 12T
● Main Drive Gear: 121T
● Autorotation Tail Drive Gear: 106T
● Tail Drive Gear: 25T
● Drive Gear Ratio: 1:10.08:4.24
● Weight(with motor): 550g
● Color carton:27.3x10x6.6cm
● Outer carton:56x31x28cm ,24sets/ctn

Accessories:
● T-REX 450 PRO V2 Kits Set X1
● 325D Carbon blades X1set
● RCE-BL35P 35A Brushless ESC X1
● 450MX Brushless motor(3400KV) X1
● DS410M (Metal Gear)Digital servoX3
● GP790 Head lock gyroX1
● DS520 Digital servoX1

Radio transmitter and electronic equipment required for assembly:
1. Transmitter(6-channel or more,helicopter system)
2. Receiver(6-channel or more)
3. Pitch gaugeX1
4. 11.1V 3S Li-Po 2000~2300mAh batteryX1

Source: Align

4-in-1 Spindle Tool
(part# GFA7077)
$23.00

This unique G-Force 4-in-1 Spindle Tool has the ability to support all of today’s spindle sizes in one single product, which works on all 450 to 90 size RC helicopters.

The G-Force 4-in-1 Spindle Tool includes 4mm, 6mm, 8mm and 10mm holes in a single unit, with a full circumference clamping power for superior gripping. CNC precision machined from T6-6061 aluminum, means this tool will never mark or scratch the spindle surface, even in the event of a stubborn spindle shaft that has been assembled with red thread locker.

The other great feature is the ability to rotate the fastener in either direction, while the spindle shaft is still clamped in the G-Force 4-in-1 Spindle Tool.

[View with PicLens]

Source: G-Force Heli

FUSUNO Neon Red Fiberglass Frame Fusion 50
FUP-200
$29.90

Fusuno Neon Frame Kits & Parts – When Different is Always Better! Looking for a way to add a whole new look to your RC helicopter? Tired of drab black and endless other “carbon” kits & parts out there? Fusuno has your answer with Neon Frame Kits & Parts, which not only add a whole new look to your helicopter, but greatly aid in visibility, which can make or break any flight!

Designed to utilize the stock hardware via your helicopter, these frame kits & parts make it easy to upgrade without the fuss & bother of special parts & pieces, allowing you to easily replace items with stock hardware.

Constructed of durable, high quality G-10 FRP (fiberglass reinforced plastic), and available in multiple exciting & bright colors, these Fusuno neon parts are treated with a hard coated dye that is not only strong, but will last long and resist scratches & chips.

If you’re in the need of a change, check out Fusuno’s exciting line of neon upgrades for your RC helicopter, and add a unique look to your RC machine that will definitely stand out from all the rest!

Also available:
FUSUNO Neon Yellow Fiberglass Frame Fusion 50
FUP-201

Source: Fusuno

FUSUNO Complete New Design Racing Checkers Airbrush Fiberglass Canopy Stratus 90
FUC-ST9001
$69.90

[View with PicLens]

[View with PicLens]

[View with PicLens]

[View with PicLens]

Source: Fusuno

Co Pilot II Go LED
Price: $24.95 (Excl. GST)

The CPII Go LED is a great accessory for any CPII system running firmware version 1.42 or higher. Need the latest firmware? Click here to install the FREE CPII Firmware Update Utility. Please note, firmware upgrades also require either the FUIM2 or newer FUIM3 PC USB interface. Simple to install and operate, the CPII Go LED connects in-line between the CPII Avionics computer and either the main or vertical sensor, and provides real-time weather indication at a glance using 3 high intensity SMT LEDs (red, yellow, green). When used with CPII systems including the Vertical Sensor, Go LED mirrors the pre-flight temperature readout usually displayed on the IRNet programmer but using the LED’s to let you know the weather status in real time. When used with CPII systems that do not include the Vertical Sensor, Go LED supports manual weather calibration by pressing and holding the MODE button. Additionally, CPII Go LED includes CPII system error messaging and flashes LEDs in certain sequences to help you trouble-shoot potential CPII issues. Now with CPII Go LED, CPII systems pre-flight checking and full capabilities are easily accessible at a glance without requiring the IRNet programmer or router. Click here for the CPII Go LED manual. The ALL NEW “Co Pilot II PC Display Software” is an adjunct product available as a free download for your Windows PC. It requires the FUIM3 PC USB interface for interconnecting the CPII Avionics computer to your PC. The software may be used as an alternative to the IRNet Programmer and Router allowing access to any programming or pre-flight functions of CPII on your Windows PC. By combining the features of the CPII Go LED, the CPII PC Display Software, and the FUIM3 PC USB interface, Revolectrix is now able to offer lower cost, full-featured Flight Stabilization systems as an alternative to the original IRNet-based systems. Click here to explore the new CPII LT product line.

Source: FMA Direct/Revolectrix

THUNDER POWER TP103CQ-ACDC 1S LIPO QUAD/4-PORT 12V AC/DC CHARGER
[TP103CQ]
$34.95

New from Thunder Power RC!

The TP103CQ-ACDC combo is the ideal, pocket-sized charger and power supply setup to charge the 1S 3.7V LiPo batteries typically used to power ultra-micro and similar class airplanes, helicopters and other models. The TP103CQ quad (4) port charger can be easily and conveniently powered from a 100-240V outlet using the included TP1201P AC to 12V DC, 1-amp power supply while the included DC input power leads can be connected to a 12V Pb/lead acid/gel cell battery for charging on the go. The charger features four ports that operate independently and allow you to charge one or up to four batteries simultaneously at a rate of 0.3A per port. Other great features include advanced multi-color LED indicators for each port that signal red when in charge mode and green when charging is complete for the simplest possible operation. The TP103CQ is compatible with Thunder Power RC ultra-micro class batteries (sold separately) in addition to most other similar class batteries.

Specifications:

•Type: 1-Cell/1S 3.7V Ultra Micro LiPo AC/DC Charger
•Input Power: 100-240V AC (using the included TP1201P Power Supply) or 11-15V DC
•Battery Cell Counts/Type: 1S LiPo (ultra-micro class)
•Charge Current: 0.3 amps per port (5 watts max)
•Charge Ports: Quad (4) independent

Features:

•Pocket-sized quad (4) port charger for 1S 3.7V ultra-micro class batteries
•Four independently operating ports for charging one or up to four batteries simultaneously
•Fixed 0.3-amp charge rate per port for safe and fast charging of ultra-micro class batteries
•Advanced Multi-Color LED indicators for each port along with a separate main power LED indicator
•Compatible with the housings and connector typically found on ultra-micro class batteries from Thunder Power RC and other popular brands
•Includes and ultra-compact 100-240V compatible AC power supply (TP1201P)
•Included DC input power leads can be connected to a 12V Pb/lead acid/gel cell battery to charge on the go

WARNING: Never leave charger unattended or charge incompatible batteries. Failure to comply may result in excessive heat, fire and/or serious damage/injury.

NOTICE: A charger is NOT a toy. To ensure proper function and to avoid risk of injury and/or damage, read and follow all instructions before operating the product. Not intended for use by children.

Source: Empire Hobby

Razor CX
Ready-To-Fly 2.4GHz Coaxial Mini Electric RC Helicopter
Part# CN1-RAZCX*
$189.95

Features:
Full metal CNC rotor head.
Full metal CNC swashplate.
G10 main frames, horizontal fin, vertical Fin, and receiver plate.
Electric motor driven 3-Blade tail rotor unit.
Carbon tail boom support struts with aluminum ends.
2.4GHz 4-Channel radio transmitter system.
LCD backlit screen enabled radio transmitter.
Gyro and receiver as one control unit.
Customizeable servo extent and gyro sensitivity.
LED indicator on receiver for signal activity.
ESC unit included.
Controlled by two 8.4g micro servos.
Powered by two 380SH brushed motors.
11.1v 1500mAh 3S lithium Polymer system battery.
CNC machined motor mounts.
230mm painted main rotor blades.
Anti-rotation bracket included.
Coaxial design makes the Razor CX easy to fly.
Balancing charger included.
Up to 10 minutes of flight time.
Also includes trim adjustment tool, pair of allen keys, user’s handbook, safety information sheet, replacement parts sheet, balancing charger instruction sheet, and radio transmitter user’s manual.

Specifications:
Type: Coaxial mini-electric R/C helicopter
Kit/ARF/RTF: Ready-to-Fly (RTF)
Main Rotor Diameter: 480mm
Overall Length: 600mm
All-up weight: 640g
Battery: 11.1v 1500mAh 3S Li-Po
Servo Weight: 8.4g
Servo Speed: 0.12 sec / 60° (4.8v)
Servo Torque: 1.4kgf.cm (4.8v)
Servo dimensions: 22.5 x 11.5 x x 24mm

Requires eight AA batteries or 9.6v 650mAh NiCd battery for the radio transmitter but nothing else!

[View with PicLens]

4 colors to choose from:
CN1-RAZCXG RAZOR CX 2.4GHZ RTF MINI ELECTRIC RC HELICOPTER (GREEN)

[View with PicLens]

CN1-RAZCXY RAZOR CX 2.4GHZ RTF MINI ELECTRIC RC HELICOPTER (YELLOW)

[View with PicLens]

CN1-RAZCXO RAZOR CX 2.4GHZ RTF MINI ELECTRIC RC HELICOPTER (ORANGE)

[View with PicLens]

CN1-RAZCXR RAZOR CX 2.4GHZ RTF MINI ELECTRIC RC HELICOPTER (RED)

[View with PicLens]

Source: Century Helicopter Products

FUSUNO Complete New Design ASSASSIN Fiberglass Airbrush Canopy Trex 550E
FUC-TX556E
$49.95
Date added: November 1, 2010

[View with PicLens]

FUSUNO New Design ASSASSIN Airbrush Fiberglass Canopy Hurricane 550
FUC-HR507
$49.99
Date added: November 1, 2010

[View with PicLens]

***Canopy Grommet Nuts are not included****

Flybar locking tool trex 450 Mika (Neon Green )
FUP-FTX-403
$4.99
Date added: November 2, 2010

[View with PicLens]

Also available:
Flybar locking tool trex 500 Mika (Neon Green ) – FUP-FTX-503
Flybar locking tool trex 600 Mika (Neon Green ) – FUP-FTX-603
Flybar locking tool trex 700 Mika (Neon Green ) – FUP-FTX-703
Flybar locking tool trex 700E Mika (Neon Green ) – FUP-FTX-703E

Flybar locking tool trex 700E Mika (Neon Orange )
FUP-FTX-702E
$4.99
Date added: November 2, 2010

[View with PicLens]

FUSUNO New Design ASSASSIN Airbrush Fiberglass Canopy Gaui X5
FUC-GX501
$49.95
Date added: November 3, 2010

[View with PicLens]

Source: Fusuno

SPRAG AUTO UNIT SET
Part# HW6058
MSRP $99.95

What makes the Sprag bearing autorotation unit better than the stock Torrington style roller bearing autorotation unit?

The Torrington style autorotation unit found in the stock Radikal G20 kit is perfectly fine for regular flights on the stock Zenoah G20 motor. The bearing included in the unit is a Japanese made NSK roller bearing offering enough grip on the hardened sleeve to overcome regular usage. When overtasked with continuous auto-rotations or increased torque from modified motors, the roller bearing could wear or break causing the autorotation unit to stay in a positive locked state.

We’ve listened to our customers and have come up with a stronger, over-engineered solution that should be an install-and-forget-it upgrade. The German made Sprag bearing that is included in the Sprag autorotation unit provides the amount of grip and free-wheeling function that allows for continuous auto-rotations and provides a substantial increase of grip necessary to run modified motors. The logarithmic spiraled engagement curve guarantees equal pitch angles between the sprags and mating surface each and every time when the clutch is engaged. This is only found in Sprag bearings which offer precise indexing resulting in increased operational life of the autorotation unit.

Includes:
1x SPRAG AUTO SLEEVE (HW6057CSP)
1x SPRAG AUTO HUB (HW6057DSP)
1x GMN SPRAG CLUTCH BEARING (CNBB1422SP)

Requires:
90T MAIN GEAR for SPRAG AUTO UNIT (HI6057D)

Use On:
Radikal G20 (optional upgrade)

Source: Century Helicopter Products

Available in both Black or Silver with Hyper White LED’s

The Gryphon Extreme-Heli regulator is a dual linear regulator consisting of hybrid components with a very strong power supply bus. The Gryphon is a high-end regulator designed to easily handle the heaviest 3D or F3C/FAI flying in the most brutal conditions.

Overview:
The Gryphon regulator is designed for the most demanding applications. The massive integrated heatsink allows the user to mount it in areas with very low airflow without consequence. The power bus feature distributes power uniformly among all servo channels while also providing complete noise filtering between each channel. Thoroughly tested and proven, this regulator is not only able to compete with the very BEST regulators out there, it completely dominates. The icing on the cake is that it just happens to look real good doing its job ;]

Specs:
- Input voltage: 6 to 10 Volts (5-8 cell NiCd/NiMH or 2cell LiFe/LiPo)
- Output voltage:
— Servo Channel: 5.2V, 6.0V, 6.8V, 7.4V, 8.4V (Unregulated)
— RX channel: 5A (Max 10A)
- Output current:
— Servo Channel: 10A (Max 15A @ 6.0V)
— RX Channel: 5A (Max 10A)
- Low Voltage Alarm Setup: LiFe type (6.5V), LiPo type (7.3V), User selectable.
- Switch Type: Fail save (Fail-Safe-On) Pin-Flag contact-less type
- Power Connector Type: Deans
- Size: 17mm x 40mm x 64mm (HxWxL)
- Weight: 45g (excluding cables)

Setup:
Output voltage is user selectable from 5.2V, 6.0V, 6.8V, 7.4V, up to 8.4V unregulated. These options are selectable using four-stage DIP switch on the bottom of the unit.

Low Voltage alarm circuit is integrated into the unit. It is user selectable on/off for safety and convenience. According to the type of battery, alarm voltage can be established (LiFe or LiPo).

Purchase the Gryphon GVR-7020 Voltage Regulator at:
ReadyHeli.com

Source: ReadyHeli