The 2010 3D Masters World Competition has officially come to an end and the FINAL results have been posted.  Click the image below to see the results for both Masters and Expert classes.

Masters Class Top 5
1. Nick Maxwell (2350.6 Points)
2. Daniel Kayzav (2333.0 Points)
3. Kyle Dahl (2330.2 Points)
4. Luigi Rungi (2222.1 Points)
5. Dominik Haegele (2175.4 [...]

If you enjoy our post, feel free to subscribes to our rss feeds

[ July 9, 2010 to July 11, 2010. ] Heliproz has finally settled into their new impressive facility located outside Billings, MT.  As promised, 2010 will be there 1st Annual Fun Fly event held at the new location which features a very large flying field on-site.  The best part is not only is the Fun Fly free to attend and fly, but HeliProz will [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Horizon Hobby and E-Flite did things a little different this time. Typically E-Flite makes the larger size heli first, then follows up closely with the micro version. In this case out first was the E-Flite mSR released shortly after IRCHA 2009, and has gone to become a very big hit. The mSR featured improved agility while still maintaining good stability over the Blade mCX. Now E-Flite has followed up with the latest Blade SR which is a complete RTR out of the box with lipo and a Spektrum 2.4ghz radio. The Blade SR is a great stepping stone for people looking to upgrade from a Blade CX coaxial heli to a more agile variable pitch single-rotor heli with tail motor.

If you enjoy our post, feel free to subscribes to our rss feeds

Since it’s official debut at IRCHA 2009 this year the first shipment of the long awaited new 50 from YS has arrived at dealers in the US.

You can find the YS 56 SR at your favorite retailer or one of the below.
Ready Heli
Hobby Hut
Esprit Model
Heli Direct
Experience RC

If you enjoy our post, feel free to subscribes to our rss feeds

Horizon Hobby just announced they are giving away a $1600 shopping spree to 3 (yes three!) lucky people.  The contest runs between now and expires on Dec 13th so enter now!  To enter all you have to do is complete an online survey that walks you through a scavenger hunt for answers located throughout the [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Scott Gray has just announced an updated version of the very popular Reactor X regulator. The new Reactor X2 adds two new key features to the proven Reactor X design; 1. three selectable voltages, and 2. 15amp continuous output power bus. The original Reactor X had two selectable voltages; 6.0v and 6.8v. [...]

If you enjoy our post, feel free to subscribes to our rss feeds

UPDATE: Today we received an e-mail from Bert Kammerer stating the new OS 91HZ-PS is *not* the same engine he has been testing recently.  While the new 61b-PII carb does feature an updated regulator design, it is not the completely new regulator system that Bert and other OS pilots are currently testing.  While the new [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Effectively immediately Common Sense RC has terminated their US distribution of the Compass Model brand.  This means they are liquidating their entire inventory of Compass kits and parts.  They are offering 50% off everything and free shipping on orders over $500.  If you own a Compass model, now would be an excellent time to purchase [...]

If you enjoy our post, feel free to subscribes to our rss feeds

A couple days ago we posted a spy shot of the updated full size Mikado V-Bar with satellite ports.  Not only is this no longer a rumor, it’s also in stock and shipping at Ready Heli today!  The nice thing about the full size V-Bar is the main unit and sensor are separate.  If you [...]

If you enjoy our post, feel free to subscribes to our rss feeds

A single image of an updated version of the full size Mikado V-Bar unit has been leaked on the net this past weekend.  This updated full size V-Bar unit features satellite RX ports same as the Mini V-Bar that allows you to use one or two JR/Spektrum satellites directly into the unit. Mikado only recommends [...]

If you enjoy our post, feel free to subscribes to our rss feeds

ReadyHeli just announced this morning the arrival of the first shipment of the new EDGE 423mm Flybar version blades.  These have been long sought after by T-Rex 500 and Protos owners.  Don’t worry flybarless owners out there, you can be sure the EDGE 423mm Flybarless version will be arriving shortly.  Also in the latest shipment [...]

If you enjoy our post, feel free to subscribes to our rss feeds

Ely.Q has announced three new factory painted canopy options for the Vision 50 helicopter.  The new canopies will be available Dec 2009, USD price is unknown currently. Click inside to see larger versions of each design.
EQ30055 Fiberglass Painted Canopy – The Rainbow

EQ30054 Fiberglass Painted Canopy – The Spider

EQ30053 Fiberglass Painted Canopy – The Incredible

If you enjoy our post, feel free to subscribes to our rss feeds

[ January 8, 2010 to January 10, 2010. ]

It’s time to kick off the 2010 event season with the AMA Expo Jan 8-10 in Ontario, Ca.  Same as last year the expo will be held at the Ontario Convention Center and feature three days of exhibitors, guest speakers, and lots more.  Advance tickets are on sale now, save a few bucks by picking [...]

If you enjoy our post, feel free to subscribes to our rss feeds

RC Hover just announced their own Black Friday sale starting right now and running through midnight Sunday Nov 29th. This time they are offering a exclusive coupon to just RC Heli Resource readers that gives them 12% instead of the normal 10% off. If that wasn’t enough, RC Hover is offering PRICE MATCH [...]

If you enjoy our post, feel free to subscribes to our rss feeds

The Futaba GY520 gyro seems to be the hot sale ticket item of the holiday season.  We have seen retailer after retailer the past week offer lower and lower sale prices on one of the latest gyros on the market.  Now Ron’s Heliproz South is jumping into the mix with the lowest price we have [...]

If you enjoy our post, feel free to subscribes to our rss feeds