Note: Please check with your local hobby shop or favorite online retailer for availability and pricing. For those hobby shops or online retailers in the United States who would like to carry these or any other Align products please contact either of the following Align Distributors to place your order.

Assurance RC Distributor

Heli Wholesaler

800E Canopy Support Set H80B009XXW
[H80B009XXW]
$14.99

Instruction:
●6061-T6 Aluminum alloy material and CNC processed。
●Use for T-REX 800E.

Specification:
●Canopy support x 2(Φ3xΦ5xΦ6.5×7.3mm)
●Canopy support extension sleeve x 2(Φ3xΦ8x7mm)
●Canopy spacer x 2(Φ4.8xΦ11x22mm)
●Socket screw x 2(M3x20mm)

Line Break - Medium Blue

Slant Thread Main Drive Gear/121T H45156QA
[H45156QA]
$7.99

Instruction:
●Use for T-REX 450 Series.
●Must with::H45157 Motor Pinion Helical Gear 12T.
●New style high strength 121 tooth Mod 0.6 helical main hear for 450 size helis. The increase gear pitch can withstand higher power, at the same time minimize operational noise. A great upgrade to withstand the modern high power system.
●Utilizes high strength polymer plastic with excellent rigidity and flexibility characteristics.
●Patented unique built in fan design to create induced air flow, effectively cooling electronics and motor.
●Gear ratio 1:10.08.

Specification:
●CNC M0.6 Slant Thread Main drive gear(121T) x 3
●Weight:35.3g

Line Break - Medium Blue

T-REX 450 Plus DFC Super Combo RH45E02XW
[RH45E02XW]
$569.99

Instruction:
●T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to the beginner enthusiasts, Align first introduced RTF (Ready to Fly) T-REX 450 PLUS.? Now, Align presents a new flybarless version:?T-REX 450 PLUS DFC. ?Complete with Align T6 2.4G transmitter and newly released 3GX MR flybarless system, this fully assembled helicopter can be flown immediately just by plugging in a charged battery, allowing the pilot to bypass assembly and adjustment process.
●The helicopter utilizes DFC rotor head assembly, paired with 3GX MR flybarless system optimized for T-REX 450 PLUS flight characteristics. ?Without any adjustment or tuning, this combo will provide optimal stability suitable for pilots of all levels.
●For those enthusiasts who wish to fine tune 3GX MR even further, it can be done through a few simple steps. In addition, 3GX MR has a FHSS 2.4GHz receiver built in, providing an all in one package.
●Align T6 R/C system utilizes Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with complete helicopter functions such as throttle/pitch curve, stunt mode switch, dual rate and exponential adjustment, etc.
●With the addition of the brand new 3GX MR, the T-REX 450 PLUS DFC pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level

Instructions:(T-REX 450Plus DFC)
Features:

●Helicopter and transmitter are factory assembled and tuned RTF version. Plug in a battery and experience immediate flight gratification.
●Align T6 R/C system utilizes Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with complete helicopter functions along with 15 model memory.
●Built in normal flight mode and stunt flight mode, with two step dual rate settings.
●Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
●Equipped with newly released 3GX MR flybarless system, with FHSS 2.4GHz receiver for built in receiver function, for simpler and more direct setup, with setting optimized for T-Rex 450 Plus DFC, resulting in more stable and more preferable control feel than ever before.
●Four piece frame plate design with imbedded servo mounting platform for fast servo install/removal without mounting nuts.
●Narrow lower frame plate and base plate design to strengthen rigidity and improve flight agility.
●Specially designed in-between frame rudder servo mount for centralized CG location to benefit 3D flying, while minimizing crash damages to rudder servo
●Equipped with MX series high efficiency brushless motor, with dramatically improved cooling efficiency for excellent power output.
●Equipped with new style REC-BL35P brushless controller featuring step-less adjustable BEC voltage between 5V to 6V.
●Dedicated rudder gyro mounting platform to isolate vibration from tail transmission, improving gyro performance.
●Newly designed battery mounting platform with integrated ESC mount for streamlined mounting of electronics.
●High precision tail pitch control assembly with aesthetically pleasing and functional design. Weighted tail blade grips effectively increases smoothness of rudder pitch action.
●New style aerodynamic canopy airbrushed with colorful graphics.
●Equipped with 3S 2200mAh 30C lithium polymer battery and charger capable of 2A fast charge rate.

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Specification (3GX MR):
●Operating Temperature:-10~60 degree
●Suitable Voltage Range:DC 3.5~8.4V
●Operating current consumption:<100mA @4.8V
●Operating humidity:0%~95%
●RoHS certified
●X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Size:37.4x20.5x12.6 mm Size
●Weight: 9g Weight

Specification:(T-REX 450Plus DFC)
●Length: 634mm
●Height: 202mm
●Main Rotor Diameter: 715mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 11T
●Main Drive Gear: 112T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10:4.24
●Flying Weight: Approx. 584g
●Color carton:27.3x10x6.6cm
●Outer carton:56x31x28cm ,24sets/ctn

Accessories:
●T-REX 450 Plus DFC Kit Set X1 set
●3GX MR Flybarless System X1 set
●ALIGN T6 6Channel Transmitter X1
●325D 3G Carbon blades X1set
●RCE-BL35P 35A Brushless ESC X1
●450MX Brushless motor(3400KV) X1
●DS415M (Metal Gear)Digital servoX3
●DS425MDigital servoX1
●3S1P 11.1V 2200 mAh/30C Li-polymer Battery X1
●Lithlum Battery Balance Charger RCC-3SD X1 set
●1.5V AA Zinc-Carbon Battery X4

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge
2.Swashplate Leveler

Line Break - Medium Blue

800E Auxiliary Battery Bottom Plate Set H80T012XXW
[H80T012XXW]
$22.99

Instruction:
●Must with H80T010XXW 800E Auxiliary battery mount set.

Specification:
●Auxiliary Battery Board (120x50x2mm) x 2

Line Break - Medium Blue

T-REX 700E DFC HV Combo RH70E04XW
[RH70E04XW]
$1680.99

Specification (T-REX 700E DFC):
Features:
1. Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
2. Brand new CCPM direct servo linkage design to eliminate the weight of double push-pull linkage system, enabling faster and more precise control reaction.
3. Integrated servo mounts on the main shaft bearing blocks, allowing cyclic servos to be mounted directly onto the bearing blocks, which together with the composite material frame plates, creating a clean and uncluttered look.
4. Utilizes composite carbon material integration technique on frame structure for ease of maintenance and high rigidity. Increased front opening area to allow for simpler battery installation.
5. Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
6. Top mounted motor base bringing the motor’s center of gravity closer to rotating disc, improving 3D agility and allowing blade drafts to cool the motor effectively .
7. Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
8. Utilizes high spec MOD1 112T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and minimize gear noise during flight.
9. Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
10. New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation .
11. Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to dramatically increase cooling effect, and improve overall power output.
12. Brand new gear box with more streamlined design also allows for simpler disassembly.
13. High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
14. High torque rated one way bearing base.
15. High precision bearing supported dual push point rudder control design.
16. High speed rated thrust bearings incorporated into tail blade grips.
17. Equipped with third bearing main shaft support to increase rigidity, meeting the needs of extreme 3D maneuvers.
18. New lightweight landing gears.
19. High grade painted fiberglass canopy with new 4 point anti-vibration mounting mechanism to simplify installation.
20. New CNC aluminum alloy mounting plate.

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Specification(T-REX 700E DFC) :
● Length: 1345mm
● Height: 360mm
● Width: 208mm
● Main Blade Length: 690mm
● Main Rotor Diameter: 1562mm
● Tail Rotor Diameter: 281mm
● Motor Drive Gear:12T
● Main Drive Gear:112T
● Autorotation Tail Drive Gear: 104T
● Tail Drive Gear: 22T
● Drive Gear Ratio: 1:9.33:4.37
● Weight(With Motor): 2900g

Accessories:
●T-REX 700E DFC Kits Set x 1set
●Aluminum Tail Boom x 1
●3K Carbon Fiber Tail Boom x 1
●690 3G Carbon Fiber Blades x 1set
●750MX Brushless Motor(530KV) x 1
●BL700H High Voltage Brushless Servo x 3
●BL750H High Voltage Brushless Servo x 1
●Castle ICE2 HV 120 Brushless ESC x 1
●105mm 3K Carbon Fiber Tail Blades x 1set

Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●6S Li-Po 4500 ~ 5200mAh x 2
●2S Li-Po 1900 ~ 2300mAh x 1
●3GX Flybarless system x 1
●Dial Pitch Gauge or Digital Pitch Gauge

Related posts:

  1. PRODUCT INFO: New Align Trex Parts Available Now
  2. NEW: Align adds product info for Trex 600 and Trex 500 parts
  3. PRODUCT INFO: Align adds info for new Super Combo and Trex 450 parts
  4. PRODUCT INFO: New heli combos announced from Align
  5. PRODUCT INFO: Align adds parts for Trex 500, 600, 700 helis
Advertisment

Subscribe to the post comments feeds or Leave a trackback