Note: Please check with your local hobby shop or favorite online retailer for availability and pricing. For those hobby shops or online retailers in the United States who would like to carry these or any other Align products please contact either of the following Align Distributors to place your order.

Heli Wholesaler

Assurance RC Distributor

T-REX 550E DFC Super Combo RH55E01XW
[RH55E01XW]
$1019.99

Instruction(3GX Programmable Flybarless System) :
●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
●3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba’s S-BUS system.
●Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
●Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
●Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
●With 3GX’s built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
●Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
●3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
●Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
●3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
●With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
●3GX’s rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
●Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

Specification(T-REX 550E DFC) :
●Features
1.Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
2. Utilizes high spec MOD1 CNC helical main gear to increase gear mesh area, and minimize gear noise during flight.
3.New lightweight rigid metal main shaft bearing blocks.
4.High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
5.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control effectiveness.
6.New body mount to increase body rigidity and added gyro placement location.
7. Newly designed rear mounted rudder servo mount.
8.Equipped with MX series high efficiency brushless motor.
9. New 2.0mm 3K carbon fiber side frame for simple yet rigid frame construction, allowing for easy assembly and maintenance.
10.High speed rated thrust bearing in tail blade grips.
11.High efficiency torque tube drive.
12.Integrated swash anti-rotation guide and gyro mounting platform.
13.Newly styled aerodynamically canopy for the ultimate fit.
14.Equipped T-REX 600 class tail boom set, supporting with 600mm main blade and increase tail stability

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Specification(3GX Programmable Flybarless System) :
●Operating Temperature:-10~60 degree
●X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Size:36.5×25.2×15.6 mm Size
●Weight11g Weight
●Supports Wide/Narrow Bandwidth Digital and brushless servos
●Spektrum and JR Satellite antennas support (Replaces original factory receiver)
●Futaba S.BUS system support
●Built in governor function
●Maximum working voltage:8.5V
●Compatible with 1024/2048 resolution Spektrum receivers
●Supports 90/120/135/140 CCPM swashplates
●Field setup without the use of a PC
●Compatible with 2 to 5 blades rotor heads
●Support up to 6 servos
●Automatic servo type recognization

Specification(T-REX 550E DFC) :
● Length: 1160mm
● Height: 330mm
● Main Blade Length: 520mm
● Main Rotor Diameter: 1188mm
● Tail Rotor Diameter: 254mm
● Motor Drive Gear:11T
● Main Drive Gear:112T
● Autorotation Tail Drive Gear: 131T
● Tail Drive Gear: 34T
● Drive Gear Ratio: 1:10.18:3.85
● Weight(With Motor): 1800g

Accessories:
●T-REX 550E DFC Kits Set X1
●Castle Talon 90 Brushless ESC x1
●520 Carbon fiber blades X1
●DS615 Digital servoX3 set
●DS655 Digital servo X1
●3GX Flybarless System X1 set
●600MX Brushless Motor X1
●90mm 3K Carbon Fiber Tail Blades X1 Set

Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●6S Li-Po 2600 ~ 5200mAh
●Dial Pitch Gauge or Digital Pitch Gauge

Line Break - Medium Red

T-REX 450 Plus DFC Super Combo RH45E01XW
[RH45E01XW]
$569.99

Instruction:
●T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to the beginner enthusiasts, Align first introduced RTF (Ready to Fly) T-REX 450 PLUS.? Now, Align presents a new flybarless version:?T-REX 450 PLUS DFC. ?Complete with Align T6 2.4G transmitter and newly released 3GX MR flybarless system, this fully assembled helicopter can be flown immediately just by plugging in a charged battery, allowing the pilot to bypass assembly and adjustment process.
●The helicopter utilizes DFC rotor head assembly, paired with 3GX MR flybarless system optimized for T-REX 450 PLUS flight characteristics. ?Without any adjustment or tuning, this combo will provide optimal stability suitable for pilots of all levels.
●For those enthusiasts who wish to fine tune 3GX MR even further, it can be done through a few simple steps. In addition, 3GX MR has a FHSS 2.4GHz receiver built in, providing an all in one package.
●Align T6 R/C system utilizes Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with complete helicopter functions such as throttle/pitch curve, stunt mode switch, dual rate and exponential adjustment, etc.
●With the addition of the brand new 3GX MR, the T-REX 450 PLUS DFC pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level

Instructions:(T-REX 450Plus DFC)
Features:

●Helicopter and transmitter are factory assembled and tuned RTF version. Plug in a battery and experience immediate flight gratification.
●Align T6 R/C system utilizes Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with complete helicopter functions along with 15 model memory.
●Built in normal flight mode and stunt flight mode, with two step dual rate settings.
●Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
●Equipped with newly released 3GX MR flybarless system, with FHSS 2.4GHz receiver for built in receiver function, for simpler and more direct setup, with setting optimized for T-Rex 450 Plus DFC, resulting in more stable and more preferable control feel than ever before.
●Four piece frame plate design with imbedded servo mounting platform for fast servo install/removal without mounting nuts.
●Narrow lower frame plate and base plate design to strengthen rigidity and improve flight agility.
●Specially designed in-between frame rudder servo mount for centralized CG location to benefit 3D flying, while minimizing crash damages to rudder servo
●Equipped with MX series high efficiency brushless motor, with dramatically improved cooling efficiency for excellent power output.
●Equipped with new style REC-BL35P brushless controller featuring step-less adjustable BEC voltage between 5V to 6V .
●Dedicated rudder gyro mounting platform to isolate vibration from tail transmission, improving gyro performance.
●Newly designed battery mounting platform with integrated ESC mount for streamlined mounting of electronics.
●High precision tail pitch control assembly with aesthetically pleasing and functional design. Weighted tail blade grips effectively increases smoothness of rudder pitch action.
●New style aerodynamic canopy airbrushed with colorful graphics.
●Equipped with 3S 2200mAh 30C lithium polymer battery and charger capable of 2A fast charge rate.

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Specification(3GX MR) :
●Operating Temperature:-10~60 degree
●Suitable Voltage Range:DC 3.5~8.4V
●Operating current consumption: ●Operating humidity:0%~95%
●RoHS certified
●X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Size:37.4×20.5×12.6 mm Size
●Weight9g Weight

Specification:(T-REX 450Plus DFC)
●Length: 634mm
●Height: 202mm
●Main Rotor Diameter: 715mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 11T
●Main Drive Gear: 112T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10:4.24
●Flying Weight: Approx. 584g
●Color carton:27.3x10x6.6cm
●Outer carton:56x31x28cm ,24sets/ctn

Accessories:
●T-REX 450 Plus DFC Kit Set X1 set
●3GX MR Flybarless System X1 set
●ALIGN T6 6Channel Transmitter X1
●325D 3G Carbon blades X1set
●RCE-BL35P 35A Brushless ESC X1
●450MX Brushless motor(3400KV) X1
●DS415M (Metal Gear)Digital servoX3
●DS425MDigital servoX1
●3S1P 11.1V 2200 mAh/30C Li-polymer Battery X1
●Lithlum Battery Balance Charger RCC-3SX X1 set
●1.5V AA Zinc-Carbon Battery X4

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge
2.Swashplate Leveler

Line Break - Medium Red

CNC Slant Thread Main Drive Gear/110T H80G002XXW
[H80G002XXW]
$24.99

Instruction:
●Precision CNC machined module 1 main gear for minimal noise and high energy transfer efficiency.
●Use for T-REX 700N/700E/800E. Must with H60225 Motor Pinion Helical Gear 13T

Specification:
●CNC M1 Slant Thread Main drive gear(110T) x 1
●Weight:64g

Line Break - Medium Red

CNC Slant Thread Main Drive Gear/112T H70G002XXW
[H70G002XXW]
$23.99

Instruction:
●Precision CNC machined module 1 main gear for minimal noise and high energy transfer efficiency.
●Use for T-REX 700N/E 800E.
●Must with Motor Pinion Helical Gear 12T/M1(H70062).

Specification:
●CNC M1 Slant Thread Main drive gear(112T) x 1
●Weight:64g

Source: Align Taiwan Webstore

Subscribe to the post comments feeds or Leave a trackback