Note: Please check with your local hobby shop or favorite online retailer for availability and pricing. For those hobby shops or online retailers in the United States who would like to carry these or any other Align products please contact either of the following Align Distributors to place your order.

Assurance RC Distributor

Heli Wholesaler

2S1P 7.4V 2600mAh/20C HBP26003
[HBP26003]
$25.99

Specification:
●Output:7.4V(2S1P)2600mAh
●Rating:20C continuous,30C burst
●Dimension:32x105x16mm
●Weight:110g
● approval(GTK-0504008)、 approval(GTK-0504008)

NOTE:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can’t exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Line Break - Medium Yellow

700N DFC Engine Bearing Block Set H7NB010XXW
[H7NB010XXW]
$14.99

Instruction:
●Use for T-REX 700 Nitro DFC.

Specification:
●Metal clutch bearing block(L) x 1
●Metal clutch bearing block(R) x 1
●Hex mounting bolt x 2(Φ5.5×60.9mm)
●Scoket screw x 2(M3x8mm)
●Socket button head collar screw x 4(M3x8mm)
●Bearing 6800ZZ × 2(Φ10xΦ19x5mm)
●Bearing 695ZZ C2 × 1(φ5xφ13x4mm)
●M3 Nut × 2

Line Break - Medium Yellow

700N DFC Fuel Tank H7NB014XXW
[H7NB014XXW]
$16.99

Instruction:
●Use for T-REX 700 Nitro DFC.

Specification:
●Fuel tank x 1
●Fuel tank sinker x 1
●Fuel tank hammer x 1
●Grommet x 1
●Fuel tube x 1(Φ2.5xΦ4.5x90mm)

Line Break - Medium Yellow

700N DFC Tail Boom H7NT002XXW
[H7NT002XXW]
$16.99

Instruction:
●6061-T6 Aluminum alloy material。
●Use for T-REX 700.
●Must with H7NT004XXW 700N DFC Torque Tube. H7NT004XXW Carbon Tail Control Rod Assembly.

Specification:
●Aluminum tail boom x 2(Φ21.5x800mm)

Line Break - Medium Yellow

700N DFC Control Shaft H7NB007XXW
[H7NB007XXW]
$7.99

Instruction:
●6061-T6 Aluminum alloy material and CNC processed.
●Use for T-REX 700 Nitro DFC.

Specification:
●Control shaft x 1(Φ5x83mm)
●Socket button head screw x 2(M3x6mm)
●Washer x 2(Φ5xΦ7.5x3mm)
●Washer x 2(Φ5xΦ7×0.5mm)
●Washer x 2(Φ5xΦ7×0.2mm)
●Washer x 2(Φ3xΦ5.5×0.3mm)

Line Break - Medium Yellow

700N DFC Tail Boom Mount H7NT001XXW
[H7NT001XXW]
$16.99

Instruction:
●Use for T-REX 700 Nitro DFC.

Specification:
●Tail boom mount(Left) × 1(109×57.5×25.5mm)
●Tail boom mount(Right) × 1(109×57.5×25.5mm)
●Hex mounting bolt × 4(5.5x47mm)
●Socket screw × 1(M4x8mm)
●Socket button head screw × 8(M3x8mm)

Line Break - Medium Yellow

700N DFC Carbon Fiber Tail Boom H7NT003XXW
[H7NT003XXW]
$36.99

Instruction:
●Use for T-REX 700.
●Must with H7NT004XXW 700N DFC Torque Tube. H7NT004XXW Carbon Tail Control Rod Assembly.

Specification:
●Tail boom x 1(Φ21.5x800mm)

Line Break - Medium Yellow

700N DFC Metal Elevator Servo Mount H7NB013XXW
[H7NB013XXW]
$15.99

Instruction:
●6061-T6 Aluminum alloy material and CNC processed。
●Use for T-REX 700N DFC.

Specification:
●Metal Elevator servo mount x 1
●Socket buton head screw x 4(M2.5x12mm)
●Socket buton head screw x 4(M2.5x8mm)

Line Break - Medium Yellow

700N DFC Engine Fan Cover Set H7NB011XXW
[H7NB011XXW]
$16.99

Instruction:
●Use for T-REX 700 Nitro DFC.

Specification:
●Engine fan cover(L) x 1(157.5×29.3x111mm)
●Engine fan cover(R) x 1(157.5×29.3x111mm)
●Hex mounting bolt x 2(5.5x47mm)

Line Break - Medium Yellow

700N DFC Main Shaft Bearing Block H7NB005XXW
[H7NB005XXW]
$28.99

Instruction:
●6061-T6 Aluminum alloy material and CNC processed。
●Use for T-REX 700 Nitro DFC.

Specification:
●Metal bearing holder x 2
●Bearing 6901ZZ x 2(Φ12xΦ24x6mm)
●Socket button head collar screw x 8(M3x8mm)

Line Break - Medium Yellow

700N DFC Carbon Bottom Plate/2.5mm H7NB003XXW
[H7NB003XXW]
$19.99

Instruction:
●Use for T-REX 700 Nitro DFC.

Specification:
●Carbon bottom plate x 1(2.5mm)

Line Break - Medium Yellow

700N DFC Carbon Main Frame(L)/2.0mm H7NB001XXW
[H7NB001XXW]
$75.99

Instruction:
●Use for T-REX 700 Nitro DFC.

Specification:
●Carbon main frame(L) x 1(2.0mm)
●Bearing mount x 1(Φ9xΦ15×4.5mm)
●Bearing MR95ZZ x 1(Φ5xΦ9x3mm)

Line Break - Medium Yellow

700N DFC Carbon Main Frame(R)/2.0mm H7NB002XXW
[H7NB002XXW]
$75.99

Instruction:
●Use for T-REX 700 Nitro DFC.

Specification:
●Carbon main frame(R) x 1(2.0mm)
●Bearing mount x 1(Φ9xΦ15×4.5mm)
●Bearing MR95ZZ x 1(Φ5xΦ9x3mm)

Line Break - Medium Yellow

700N DFC Canopy Support Set H7NB008XXW
[H7NB008XXW]
$12.99

Instruction:
●6061-T6 Aluminum alloy material and CNC processed。
●Use for T-REX 700 Nitro DFC.

Specification:
●Frame mounting bolt x 1(Φ5.5x47mm)
●Frame mounting bolt x 1(Φ6.5x47mm)
●Canopy spacer x 2(Φ4.8xΦ11x22mm)
●Canopy support x 2(Φ3xΦ5xΦ6.5×7.3mm)
●Socket screw x 2(M3x14mm)
●Socket screw x 2(M4x16mm)
●M4 Washer x 2(Φ4xΦ10x1mm)

Line Break - Medium Yellow

700N DFC Front Frame Mount H7NB006XXW
[H7NB006XXW]
$14.99

Instruction:
●6061-T6 Aluminum alloy material and CNC processed.
●Use for T-REX 700 Nitro DFC.

Specification:
●Front frame mount x 2(13.5x18x51mm)
●Socket button head collar screw x 8(M3x8mm)

Source: Align Taiwan Webstore

Subscribe to the post comments feeds or Leave a trackback